Excalibur Bulldog 400

Crossbow Hunting

Moderators: Bill T, Excalibur Marketing Dude

Excalibur Bulldog 400

Postby mchurch » Fri Mar 11, 2016 9:08 pm

Does anyone know if the 100 grain ramcat broadhead will work on an 18 inch arrow or will the blades hit the riser?
Excalibur Matrix Bulldog 400
Single stage trigger tech
Hawke Xb 30 pro sr ir
18 inch Black eagle zombie slayers, spynal tapps
Grim reaper carni four, G5 havoc, Qad exodus, excalibur x act
mchurch
 
Posts: 386
Joined: Thu Oct 04, 2007 11:07 am
Location: Santa Maria, Ca. USA

Re: Excalibur Bulldog 400

Postby newbie » Fri Mar 11, 2016 9:16 pm

Just a guess or assumption,,,,, if they work in other bowsthey should be fine in the Bulldog.
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
User avatar
newbie
 
Posts: 2465
Joined: Tue Jun 15, 2010 9:02 pm
Location: Brantford Ontario

Re: Excalibur Bulldog 400

Postby mchurch » Fri Mar 11, 2016 9:22 pm

That is what I was thinking as well. It does look like the tip of the arrow sits deeper in the riser channel than the other models.
Excalibur Matrix Bulldog 400
Single stage trigger tech
Hawke Xb 30 pro sr ir
18 inch Black eagle zombie slayers, spynal tapps
Grim reaper carni four, G5 havoc, Qad exodus, excalibur x act
mchurch
 
Posts: 386
Joined: Thu Oct 04, 2007 11:07 am
Location: Santa Maria, Ca. USA

Re: Excalibur Bulldog 400

Postby racking up points » Sat Mar 12, 2016 7:35 am

I guess it would depend on where the end of that 18" arrow sits on the bulldog. In a 405 it's no problem, the end of the arrow isn't in the riser cut-out it's beyond that.
Leupold Optics
Boo Custom Strings
Black Eagle Arrows
Ti64.com Fastener Kits
User avatar
racking up points
 
Posts: 1431
Joined: Mon Aug 12, 2013 6:41 pm
Location: Windsor, ON

Re: Excalibur Bulldog 400

Postby Hunt it » Sat Mar 12, 2016 10:05 am

Factory spec for BullDog calls for 18" arrow you should be just fine.
User avatar
Hunt it
 
Posts: 950
Joined: Fri Mar 01, 2013 9:02 am
Location: 35 mins North of Lake Erie and 35 mins East of Lake Huron

Re: Excalibur Bulldog 400

Postby Boo » Sat Mar 12, 2016 11:27 am

The Bulldog with a 20" shaft
Image
If there are no dogs in heaven then I want to go where they went. Will Rogers
Si vis pacem, para bellum
boocustomstrings.com/
Random acts of kindness can change the world
Correct a fool and he'll hate you, Correct a wise man he'll thank you!
User avatar
Boo
 
Posts: 10638
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada

Re: Excalibur Bulldog 400

Postby Boo » Sat Mar 12, 2016 12:01 pm

Forgot to add that the broadhead pocket is 1 3/8" wide.
If there are no dogs in heaven then I want to go where they went. Will Rogers
Si vis pacem, para bellum
boocustomstrings.com/
Random acts of kindness can change the world
Correct a fool and he'll hate you, Correct a wise man he'll thank you!
User avatar
Boo
 
Posts: 10638
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada

Re: Excalibur Bulldog 400

Postby ROGER THAT » Sat Mar 12, 2016 12:27 pm

]Image
Last edited by ROGER THAT on Sun Mar 13, 2016 3:08 pm, edited 38 times in total.
>>====>
Work Hard Hunt Harder
Matrix 380 Xtra (Serenity)
Matrix 405 (cwn annwn)
Matrix Bulldog 400 (Acwellen)
Matrix Grizzly (Armel)
Micro 355 (Siofra)
User avatar
ROGER THAT
 
Posts: 181
Joined: Sat Apr 06, 2013 2:26 pm
Location: Northern N.J.

Re: Excalibur Bulldog 400

Postby ROGER THAT » Sat Mar 12, 2016 12:29 pm

Well That Didn`t Work :oops: :oops:[imgImage][/img]
Last edited by ROGER THAT on Sun Mar 13, 2016 3:10 pm, edited 1 time in total.
>>====>
Work Hard Hunt Harder
Matrix 380 Xtra (Serenity)
Matrix 405 (cwn annwn)
Matrix Bulldog 400 (Acwellen)
Matrix Grizzly (Armel)
Micro 355 (Siofra)
User avatar
ROGER THAT
 
Posts: 181
Joined: Sat Apr 06, 2013 2:26 pm
Location: Northern N.J.

Re: Excalibur Bulldog 400

Postby Boo » Sat Mar 12, 2016 12:38 pm

Image
If there are no dogs in heaven then I want to go where they went. Will Rogers
Si vis pacem, para bellum
boocustomstrings.com/
Random acts of kindness can change the world
Correct a fool and he'll hate you, Correct a wise man he'll thank you!
User avatar
Boo
 
Posts: 10638
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada

Re: Excalibur Bulldog 400

Postby ROGER THAT » Sat Mar 12, 2016 12:40 pm

18 inch diablo
Thanks Brother Boo :D :D
>>====>
Work Hard Hunt Harder
Matrix 380 Xtra (Serenity)
Matrix 405 (cwn annwn)
Matrix Bulldog 400 (Acwellen)
Matrix Grizzly (Armel)
Micro 355 (Siofra)
User avatar
ROGER THAT
 
Posts: 181
Joined: Sat Apr 06, 2013 2:26 pm
Location: Northern N.J.

Re: Excalibur Bulldog 400

Postby GROOTSKY » Fri Mar 17, 2017 11:17 am

With the 18" arrow sitting so deep and the broadhead pocket only being 1-3/8 inches wide it really limits the width of a fixed blade to about 1-1/4".

Running a 20" arrow would be an option, but reading an old post by Boo it seemed that the Matrix series shot the 18" arrow really well.
GROOTSKY
 
Posts: 40
Joined: Tue Apr 28, 2015 2:34 pm
Location: Smithers B.C. Canada

Re: Excalibur Bulldog 400

Postby paulaboutform » Fri Mar 17, 2017 12:55 pm

Looking at those pics I would NEVER run an 18" arrow from that bow. I'd actually go 21" and still keep my broadheads inside the stirrup. Don't worry about the accuracy. You'll gain better accuracy with the longer arrow if anything changes at all. Imo shooting that 18" arrow from that bow is just asking to unload an arrow through your foot at some point. :shock:

Paul
paulaboutform
 
Posts: 3887
Joined: Sun Nov 24, 2013 11:32 pm
Location: Coquitlam, British Columbia


Return to Crossbow Hunting

Who is online

Users browsing this forum: Bing [Bot], flightattendant100, Majestic-12 [Bot] and 22 guests