Excalibur xact cut deal

Crossbow Hunting

Moderators: Bill T, Excalibur Marketing Dude

Post Reply
User avatar
longbow joe
Posts: 1568
Joined: Sat Jun 06, 2015 8:55 pm
Location: south eastern pa (bucks county)

Excalibur xact cut deal

Post by longbow joe » Thu Jun 15, 2017 9:46 pm

I went to an estate sale this sat.l wish l woulda got there an hour earlier .There was sopossed to be a lot of archery gear there. Anyway l got 5 unopened packs of xact cuts for 20 dollars. So l guess l can put my beloved spitfire on hold this year. Does any buddy have any encouraging words about them .l know they work just interested in some personal experiences .l normally use a 125 grain with a 110 insert but the 25 grain difference dosnt sway me with the 100 xact.
Micro 335 camo crossbones /matrix 330 workhorse nikon bolt /vixen ll / striker offspring with a micro stock crossbones/ matrix 355 with a micro stock crossbones/ metal ibex (adopted manco morto)/ trigger tec's on most / spitfires/easton2216s/zombies

User avatar
Boo
Posts: 10843
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada
Contact:

Re: Excalibur xact cut deal

Post by Boo » Fri Jun 16, 2017 3:56 pm

I've shot them into targets and with 110 inserts, they will fly really well. I cant say how well they'll kill first hand but I can tell you that they've been used in Africa with good results. They only negative I've heard is that on big animals, the blades sometimes bend.
If there are no dogs in heaven then I want to go where they went. Will Rogers
Si vis pacem, para bellum
Correct a fool and he'll hate you, Correct a wise man he'll thank you!
Madness is having a Malinois
Boocustomstrings.com

User avatar
longbow joe
Posts: 1568
Joined: Sat Jun 06, 2015 8:55 pm
Location: south eastern pa (bucks county)

Re: Excalibur xact cut deal

Post by longbow joe » Fri Jun 16, 2017 9:57 pm

Longbow joe too poor to hunt cape buffalo or elephants.Plus too far a plane ride.To be fair this things actually look tougher than my spitfires.
Micro 335 camo crossbones /matrix 330 workhorse nikon bolt /vixen ll / striker offspring with a micro stock crossbones/ matrix 355 with a micro stock crossbones/ metal ibex (adopted manco morto)/ trigger tec's on most / spitfires/easton2216s/zombies

User avatar
Scotty_X2
Posts: 61
Joined: Tue Jul 10, 2012 7:42 pm
Location: Midland, Ontario

Re: Excalibur xact cut deal

Post by Scotty_X2 » Sat Jun 17, 2017 10:57 am

I have used these for Turkeys the last few years. No issues, they are very accurate.
Matrix 405
Matrix 355
Matrix Cub
Micro 335
PHOENIX
GRZ2

janesy
Posts: 659
Joined: Sat Dec 05, 2015 8:20 pm
Location: Beavertown. Ont

Re: Excalibur xact cut deal

Post by janesy » Sat Jun 17, 2017 6:59 pm

I put the same head through 5/8 plywood numerous times at 25 yards. Most times it did not penetrate past the blades. But the head never bent and the blades although dull as anything, remained straight enough you had to look hard to see any damage.
In my limited opinion, they are a solid broadhead.
Matrix 355 (sold :( )
Micro-Mod 360
Micro 315 fully jambed!
It so hard to choose... Just get one of everything.

Post Reply

Who is online

Users browsing this forum: GrassyKnoll, ko4nrbs, Majestic-12 [Bot], mr meat, Patcon and 36 guests