New Micro Brace Height

Crossbow Hunting

Moderators: Bill T, Excalibur Marketing Dude

Post Reply
grizzly72
Posts: 99
Joined: Wed Aug 05, 2009 12:53 pm
Location: Pennsylvania

New Micro Brace Height

Post by grizzly72 » Fri Jun 16, 2017 10:40 am

Hi All,

I just got my dad a new Micro 335 with the Danny Miller Bumpers on it. My older model Micro has a line across the rail as a brace height reference, this one doesn't? I would Like to be able to measure back from the riser/rail joint and make a mark on the side as a reference point, but I can't find this distance anywhere. Any help is appreciated.. Thanks

vixenmaster
Posts: 12970
Joined: Wed Sep 14, 2005 2:51 pm
Location: Land of Rocks, Ozarks Mo.

Re: New Micro Brace Height

Post by vixenmaster » Fri Jun 16, 2017 2:28 pm

Mine does not have a line, i jus keep the string 3/16 - 1/4 from bumpers
crossbowcrossroads.com/forum/index
Marie Laveau Voodoo Queen Matrix 360 Captain Morgan Micro Nitemare 335
Pipsqueak Hybrid Micro/Matrix 135 lb 235 fps
Captain Jack Sparrow Custom Micro 355
vixenmasterstrings@yahoo.com 417-505-9315

User avatar
sirwill
Posts: 19
Joined: Tue Jun 06, 2017 2:23 pm

Re: New Micro Brace Height

Post by sirwill » Fri Jun 16, 2017 2:29 pm

My new 2017 Micro which is less then a week old Measures (1 7/8" at the back side of the string) from were the riser meets the rail... I hope this helps?

grizzly72
Posts: 99
Joined: Wed Aug 05, 2009 12:53 pm
Location: Pennsylvania

Re: New Micro Brace Height

Post by grizzly72 » Fri Jun 16, 2017 3:10 pm

OKAY THANKS

User avatar
robertyb
Posts: 2102
Joined: Mon Feb 06, 2012 8:35 pm
Location: Georgia

Re: New Micro Brace Height

Post by robertyb » Fri Jun 16, 2017 3:22 pm

Keep it 1/4" off the bumpers and it will be fine.
Wildlife Population Control Specialist

dithian
Posts: 15
Joined: Thu Apr 06, 2017 12:35 pm
Location: Hawaii

Re: New Micro Brace Height

Post by dithian » Mon Jun 19, 2017 5:25 pm

I contacted Excalibur about a week ago about the same thing. They said about 1/4" off the bumper is about right. Apparently, it is better to err on the side of too high than too low for the sake of limb longevity.

Post Reply

Who is online

Users browsing this forum: Google [Bot], Peashooterjoe and 29 guests