Bolt question

Crossbow Hunting

Moderators: Bill T, Excalibur Marketing Dude

Bolt question

Postby kd8jgu » Mon Jul 10, 2017 10:17 am

Going to be purchasing a Micro335 Nightmare when done with Boy Scouts summer camp season is over.
Was wondering what the going bolt set up is these days.
Yes I am back been a while
Sorry thing is I have 2.5 weeks left here teaching then will be back to remove some of these hogs.
May my aim be true and my arrow fly straight

Soon to arrive:
Micro 335 Nightmare (Porky's Nightmare)
Will update as I play with it

Grizzly - Beast Stinger
Vixenmaster string
125 grain Stinger Buzzcutts
Matrix 355 Lady Laveau
Vixenmaster string
User avatar
kd8jgu
 
Posts: 690
Joined: Tue Jul 26, 2011 11:22 pm
Location: East Texas

Re: Bolt question

Postby nchunterkw » Mon Jul 10, 2017 11:05 am

Welcome back..
I like a 16" very stiff arrow like a Zombie SLayer or a GT Nitro...especially for hogs. I

f you go with the Nitro's you will need to get some extra weights for the front end. Their brass inserts bare only around 65gr if I remember.

ZS wll be a bit simpler. I'd go 16" ZS, 110gr brass insert and a 150gr fixed head for hogs. Put 2" blazers on the back end and a NuFletch Igniter and you'd be set I think. Put you around 460ge total, which shoudl do well on even a big boar.
Keith
"Remember...always drink upstream from the herd."

Micro, Vortex
RamCat, Slick Trick, Magnus
Black Eagle Executioners & Zombies, Easton FMJs
2" Trueflight Feathers, DeerBoyArchery Strings
deerboyarchery@gmail.com
<{{{><
User avatar
nchunterkw
 
Posts: 1858
Joined: Sat Dec 24, 2011 11:21 am
Location: Wake Forest, NC

Re: Bolt question

Postby paulaboutform » Mon Jul 10, 2017 11:15 am

Welcome back. If you take a look near the top of the page there's a sticky of forum members arrow setup with their bows. That'll show a lot. Personally, I like the 16' zombies or executioner arrows with 92gr or 110gr brass inserts, 100gr or 125gr points, plastic nocks and 2" blazers fletched with the Arizona Rim E-Z Fletch Bolt.

Paul
paulaboutform
 
Posts: 4011
Joined: Sun Nov 24, 2013 11:32 pm
Location: Coquitlam, British Columbia

Re: Bolt question

Postby amythntr » Mon Jul 10, 2017 4:15 pm

paulaboutform wrote:Welcome back. If you take a look near the top of the page there's a sticky of forum members arrow setup with their bows. That'll show a lot. Personally, I like the 16' zombies or executioner arrows with 92gr or 110gr brass inserts, 100gr or 125gr points, plastic nocks and 2" blazers fletched with the Arizona Rim E-Z Fletch Bolt.

Paul




.... I shoot the 335..everything as Paulaboutform said including the "sticky" for everyone's setups...I use the 92 grain insert and on those ZS I either use the Firenocks or the Lumenoks back in the "lighthouse!"

Anthony :)
When you are in a tough situation and wonder where God is; ...the Teacher is always quiet during the test.

BD400(Fulmine Grande)
M380(Jelly Belly)
NMare 335(Bada Bing)
ZS
SpitfireXXX
NAP FOC
xbones
TT 2.5
BOO,NChunterkw,Vixenm
DrStirrup kitx3
User avatar
amythntr
 
Posts: 5278
Joined: Wed Nov 13, 2013 12:26 pm
Location: Northern, NJ

Re: Bolt question

Postby kd8jgu » Tue Jul 11, 2017 12:14 am

Here is what I am looking at
Executioners 16" 144 grain
alum nock 14 grain
fletching 2" 18 grain
insert 110 grain
Broadhead 125 grain

total weight 411 grain

Should this put me in the ballpark
May my aim be true and my arrow fly straight

Soon to arrive:
Micro 335 Nightmare (Porky's Nightmare)
Will update as I play with it

Grizzly - Beast Stinger
Vixenmaster string
125 grain Stinger Buzzcutts
Matrix 355 Lady Laveau
Vixenmaster string
User avatar
kd8jgu
 
Posts: 690
Joined: Tue Jul 26, 2011 11:22 pm
Location: East Texas

Re: Bolt question

Postby paulaboutform » Tue Jul 11, 2017 1:00 am

kd8jgu wrote:Here is what I am looking at
Executioners 16" 144 grain
alum nock 14 grain
fletching 2" 18 grain
insert 110 grain
Broadhead 125 grain

total weight 411 grain

Should this put me in the ballpark


If you insist on using aluminum nocks I strongly recommend using a fine grit painter's sanding sponge to break the edge of the nock them polishing them using a buffing wheel and dremel tool with jewellers rouge. Also, do not epoxy your aluminum nocks in the shafts. Use a low temperature archer's glue stick (just a tiny amount). Keeping the nocks perfectly smooth is paramount in avoiding your serving getting cut. Using the glue stick will allow you to screw a field point into your aluminum nocks and remove damaged ones with minimal heat and not compromise your shafts. *it's much easier to just use the plastic flat nocks though. :wink:

Paul
paulaboutform
 
Posts: 4011
Joined: Sun Nov 24, 2013 11:32 pm
Location: Coquitlam, British Columbia

Re: Bolt question

Postby paulaboutform » Tue Jul 11, 2017 1:00 am

.....having said that, your setup sounds great! :D

Paul
paulaboutform
 
Posts: 4011
Joined: Sun Nov 24, 2013 11:32 pm
Location: Coquitlam, British Columbia

Re: Bolt question

Postby kd8jgu » Tue Jul 11, 2017 10:43 am

looking at weight of alum nock and the plastic
6 grains difference will try both when I test to see if there is that much of a difference
May my aim be true and my arrow fly straight

Soon to arrive:
Micro 335 Nightmare (Porky's Nightmare)
Will update as I play with it

Grizzly - Beast Stinger
Vixenmaster string
125 grain Stinger Buzzcutts
Matrix 355 Lady Laveau
Vixenmaster string
User avatar
kd8jgu
 
Posts: 690
Joined: Tue Jul 26, 2011 11:22 pm
Location: East Texas

Re: Bolt question

Postby nchunterkw » Tue Jul 11, 2017 1:13 pm

Al or plastic nocks will not make any noticeable flight differences given your high FOC.....which is good. You can glue something like a set screw into the inside of a plastic nock to increase weight if you want. But 8 grains one way or another won't make a difference in the terminal performance of that setup. I'd say you are good to go....but with the caveat to not shoot a big boar hog in the shield. I'd think that might be iffy ay only 400gr. Butu 200lbs and under and I think you will be fine
Keith
"Remember...always drink upstream from the herd."

Micro, Vortex
RamCat, Slick Trick, Magnus
Black Eagle Executioners & Zombies, Easton FMJs
2" Trueflight Feathers, DeerBoyArchery Strings
deerboyarchery@gmail.com
<{{{><
User avatar
nchunterkw
 
Posts: 1858
Joined: Sat Dec 24, 2011 11:21 am
Location: Wake Forest, NC

Re: Bolt question

Postby kd8jgu » Tue Jul 11, 2017 1:46 pm

I have been shooting both bolts and my compound bow with weights of 408 and 416 grain with out problems
My traditional arrows weigh 496 grain if hog is under 200 and within 25 yards I will fling out side of that they get to walk
I do everything I can do to not hit shield it tends to just p#$$ them off
May my aim be true and my arrow fly straight

Soon to arrive:
Micro 335 Nightmare (Porky's Nightmare)
Will update as I play with it

Grizzly - Beast Stinger
Vixenmaster string
125 grain Stinger Buzzcutts
Matrix 355 Lady Laveau
Vixenmaster string
User avatar
kd8jgu
 
Posts: 690
Joined: Tue Jul 26, 2011 11:22 pm
Location: East Texas


Return to Crossbow Hunting

Who is online

Users browsing this forum: Bing [Bot], Google [Bot], Majestic-12 [Bot] and 34 guests