Trigger tech recall

Crossbow Hunting

Moderators: Bill T, Excalibur Marketing Dude

User avatar
RobD
Posts: 88
Joined: Wed Feb 18, 2015 12:14 pm
Location: Mt. Pleasant, MI

Re: Trigger tech recall

Post by RobD » Thu Jul 13, 2017 3:05 pm

mchurch wrote:Looks like it now voids the warranty
That sucks. Wonder which one gets picked on next?
- The use of non-factory strings that void the limb warranty.
- Munch Mounts over-stressing the frame.
- Non-factory bolts damaging the rail.
Matrix 380 Xtra
Matrix 350SE
Sapphire (Kids)

ADF | Vixenmaster strings - Love 'em! | TriggerTech | DrStirrup Stirrups, Cocking aids, & Silencers | Munch Mounts

User avatar
amythntr
Posts: 5443
Joined: Wed Nov 13, 2013 12:26 pm
Location: Northern, NJ

Re: Trigger tech recall

Post by amythntr » Thu Jul 13, 2017 3:11 pm

RobD wrote:
mchurch wrote:Looks like it now voids the warranty
That sucks. Wonder which one gets picked on next?
- The use of non-factory strings that void the limb warranty.
- Munch Mounts over-stressing the frame.
- Non-factory bolts damaging the rail.
- Dr Stirrup Setup,
- cutting the rail,
-switching our rails and limbs (that are not broke),
-Ti64 Titanium Screws (these must be the culprit),
-wrapping the stirrup with non Excalibur coating,
-polishing the latches,
-not having an Excalibur licensed and trained shop work on your bow,
-putting a non-factory scope on the bow,
-If you use the CB in the USA,

....the freakin list goes on!

Anthony :evil:
When you are in a tough situation and wonder where God is; ...the Teacher is always quiet during the test.

M380(Jelly Belly)
NMare 335(Bada Bing)
Scorpyd Death Stalker (Oofah!)
ZS,Exec
Spitfires
xbones
VX-R
TT 2.5
BOO,NChunterkw,Vixenm
DrStirrup kit

User avatar
amythntr
Posts: 5443
Joined: Wed Nov 13, 2013 12:26 pm
Location: Northern, NJ

Re: Trigger tech recall

Post by amythntr » Thu Jul 13, 2017 3:16 pm

amythntr wrote:
RobD wrote:
mchurch wrote:Looks like it now voids the warranty
That sucks. Wonder which one gets picked on next?
- The use of non-factory strings that void the limb warranty.
- Munch Mounts over-stressing the frame.
- Non-factory bolts damaging the rail.
- Dr Stirrup Setup,
- cutting the rail,
-switching our rails and limbs (that are not broke),
-Ti64 Titanium Screws (these must be the culprit),
-wrapping the stirrup with non Excalibur coating,
-polishing the latches,
-not having an Excalibur licensed and trained shop work on your bow,
-putting a non-factory scope on the bow,
-you can no longer use any arrows or broadheads not manufactured by Excal,
-If you use the CB in the USA,

....the freakin list goes on!

Anthony :evil:
PS: in my opinion, Excalibur (Bowtech) took this opportunity to bash another manufacturer to make themselves look better....TTT issues were limited in scope and for a short duration....it has long been rectified...

....very similar to Excalibur's debacle 405....identified, owned up to it, fixed and moved on....

....Extremely poor marketing move Excalibur!
When you are in a tough situation and wonder where God is; ...the Teacher is always quiet during the test.

M380(Jelly Belly)
NMare 335(Bada Bing)
Scorpyd Death Stalker (Oofah!)
ZS,Exec
Spitfires
xbones
VX-R
TT 2.5
BOO,NChunterkw,Vixenm
DrStirrup kit

User avatar
wheelie
Posts: 3703
Joined: Sat Nov 08, 2008 3:01 am
Location: Meaford, Ont.

Re: Trigger tech recall

Post by wheelie » Thu Jul 13, 2017 4:09 pm

Guess if the bow shoots off by itself and you drop it or years ago mine shot off and jammed into treestand and broke scope, should they be responsible to fix it? Bill T and Excalibur fixed mine and would not hear of accepting some money from me.

Hard subject and likely protecting themselves from liability. When the going get tough most people walk away. Only your best of friends stick with you. Most times it is not who you expect to stick with you.

CHEERS!

User avatar
bellerivercrossbowhunter
Posts: 1911
Joined: Sun Dec 25, 2005 12:56 pm
Location: Belleriver Ontario

Re: Trigger tech recall

Post by bellerivercrossbowhunter » Thu Jul 13, 2017 4:20 pm

My trigger falls in to the recalled triggers. Looks like I'll send it in after BOO fest. I commend TT for stepping up to the plate and doing the right thing..
Micro Black Widow. BOO string.Vortex XBR. Exodus broad heads. Spynal Tapp arrows....


I live to hunt and hunt to live. I am a meat eater!!!

W.Miguire
Posts: 1007
Joined: Wed Jun 04, 2014 6:26 pm
Location: Washington Island Wisc.

Re: Trigger tech recall

Post by W.Miguire » Thu Jul 13, 2017 6:05 pm

I have two one is ok and the other I will have to send in . Called them this morn and they were very helpful ,just waiting for the box to come in the mail to send it back . and yes they can send back you old trigger if you request it . if they can fix it they will . It is in your interest to try to correct the problem .Not a big deal for me.
W.M.

User avatar
Riflemanz
Posts: 2056
Joined: Thu Feb 04, 2010 8:12 am
Location: SE Wisconsin

Re: Trigger tech recall

Post by Riflemanz » Thu Jul 13, 2017 7:03 pm

For my matrix 355 the serial number is on the upper front of the trigger,just use a brite light, no need to take apart.
Mine is fine, I have the 2.5 matrix hunter model.
Team Matrix 355
Matrix 355 The Crusher
TT 2 stage trigger
Executioner arrows
Easton XX75 magnums 2219
Xcaliber custom string
Boo Custom String
Vixenmaster Custom string
8ptbuk string
Rocket 3 blade 2" cut
Slick tricks
HSS Vest 30' lifeline

User avatar
IronNoggin
Posts: 1080
Joined: Tue Dec 27, 2011 7:53 pm
Location: Port Alberni, Vancouver Island

Re: Trigger tech recall

Post by IronNoggin » Thu Jul 13, 2017 7:20 pm

Maybe a mistake on my part...

But I figure if the two TT's I run haven't failed with thousands upon thousands of shots through them, I am not even going to bother pulling them to look at numbers... :wink:

Cheers,
Nog
"Political correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."

paulaboutform
Posts: 4138
Joined: Sun Nov 24, 2013 11:32 pm
Location: Coquitlam, British Columbia

Re: Trigger tech recall

Post by paulaboutform » Thu Jul 13, 2017 7:29 pm

I got the email last night. I guess I've got a few bows to take apart to check serial numbers on triggers.

Paul

User avatar
8ptbuk
Posts: 1507
Joined: Sun Oct 14, 2012 11:14 am
Location: Patrick County Virgina

Re: Trigger tech recall

Post by 8ptbuk » Thu Jul 13, 2017 8:01 pm

Is the SN not on the box it came in ?
James : 1 - 19-20 Know this , My beloved Brothers : Let every person be quick to hear , slow to speak , slow to anger , for the anger of man does not produce the righteousness of God .

8ptbuk's Flemish Strings
8ptcustomstrings@gmail.com

User avatar
wheelie
Posts: 3703
Joined: Sat Nov 08, 2008 3:01 am
Location: Meaford, Ont.

Re: Trigger tech recall

Post by wheelie » Thu Jul 13, 2017 8:16 pm

Mine has no serial number nor does it even say Triggertech on the trigger. :lol: One of the very first runs. :wink:

User avatar
NewGuy
Posts: 852
Joined: Mon Oct 21, 2002 6:10 pm
Location: Guelph,Ontario

Re: Trigger tech recall

Post by NewGuy » Thu Jul 13, 2017 8:23 pm

I pulled mine out of the offspring, not on the list. Now I have to pull the one out of my AR-15 to check.
Boo/Comfybear Custom strings

StephenK
Posts: 1
Joined: Sat Mar 21, 2015 7:21 am

Re: Trigger tech recall

Post by StephenK » Thu Jul 13, 2017 8:41 pm

For my matrix 355 the serial number is on the upper front of the trigger,just use a brite light, no need to take apart.
I also have a Matrix 355, I couldn't see the serial number, only a sticker that says do not remove.

User avatar
xcaliber
Posts: 8310
Joined: Fri Jan 11, 2013 7:35 pm
Location: NW Indiana

Re: Trigger tech recall

Post by xcaliber » Thu Jul 13, 2017 10:02 pm

I'm OK, installed mine before labor Day 2014. :wink:
Matrix 355 (Trixxi) Redfield Revenge 2.5 Trigger Tech
Matrix 330 (Xylia) Nikon Bolt XR Single Stage Trigger Tech
Kodabow Zulu Scout (Karma) MFO Tagged Out Sights.
Hoyt Spyder 34 (Black Magic)

User avatar
amythntr
Posts: 5443
Joined: Wed Nov 13, 2013 12:26 pm
Location: Northern, NJ

Re: Trigger tech recall

Post by amythntr » Fri Jul 14, 2017 4:26 am

....Woke "....BadaBing 8)" up in the middle of the night telling him I needed to take his temperature (rectally , of course) and proceeded to dive in....in search of that TT serial number....well, I was happy to find out that he passed and his "family jewels" are NOT included in the recall sequence....

....I am going to keep my TTT in there because for me it is much better than the factory one that came with it...I will take my chances....

....the upshot to taking him apart is that I got to check the fasteners in the trigger box and the stock to rail...and re-apply Blue Loctite.... He now should be good to go as we are Boofest Bound next week...

....One down, and a bunch more to go...

Anthony :)
When you are in a tough situation and wonder where God is; ...the Teacher is always quiet during the test.

M380(Jelly Belly)
NMare 335(Bada Bing)
Scorpyd Death Stalker (Oofah!)
ZS,Exec
Spitfires
xbones
VX-R
TT 2.5
BOO,NChunterkw,Vixenm
DrStirrup kit

Post Reply

Who is online

Users browsing this forum: artifact, Bing [Bot], Buszone, nchunterkw, rmb721 and 74 guests