Matrix 350se limbs

Crossbow Hunting

Moderators: Bill T, Excalibur Marketing Dude

whoay
Posts: 36
Joined: Mon Sep 12, 2016 11:04 am
Location: Pennsylvania

Matrix 350se limbs

Post by whoay » Thu Aug 10, 2017 12:10 pm

Was shooting my bow last night and after I was done was wiping her down and notice a small splinter on the right limb on the inside bottom near the radius it's maybe a inch long... after reading previous post just picked it off and sanded it down going to hunt this season like is then maybe have it replaced any one else have this happen? And are the limbs on the 350se the same as the m405? Also I have never dry fired the bow and baby it... also notice the brave height was a little tight so I fixed that after I notice the splinter....

whoay
Posts: 36
Joined: Mon Sep 12, 2016 11:04 am
Location: Pennsylvania

Re: Matrix 350se limbs

Post by whoay » Thu Aug 10, 2017 1:11 pm

So I'm the only one that this has happened to with the 350se?

Buzzard II
Posts: 78
Joined: Tue Jul 24, 2012 3:14 pm
Location: Northern New Jersey

Re: Matrix 350se limbs

Post by Buzzard II » Thu Aug 10, 2017 2:08 pm

I haven't shot mine yet but I hope nothing goes wrong with it. Keep us informed how your 350 is doing. Thanks.
Bob
THE IMMENSE IMPORTANCE OF A PINT OF ALE TO A COMMON PERSON SHOULD NEVER BE OVERLOOKED!

Quintehunter
Posts: 57
Joined: Tue Dec 08, 2015 1:01 pm
Location: Trenton, ON

Re: Matrix 350se limbs

Post by Quintehunter » Thu Aug 10, 2017 2:58 pm

whoay wrote:So I'm the only one that this has happened to with the 350se?
An hour sure doesn't give many people a chance to respond.
I haven't had a single issue with my 350SE, but I did with a Grizzly last year and warranty took care of it quickly. Now is the time to get it taken care of before hunting seasons open up.

User avatar
robertyb
Posts: 2158
Joined: Mon Feb 06, 2012 8:35 pm
Location: Georgia

Re: Matrix 350se limbs

Post by robertyb » Thu Aug 10, 2017 3:13 pm

I think I remember seeing one other post on one of the forums about a limb splinter on a 350 LE. I have had to replace a set of limbs on a Vortex and a Matrix 330 though. Never had a dry fire.
Wildlife Population Control Specialist

whoay
Posts: 36
Joined: Mon Sep 12, 2016 11:04 am
Location: Pennsylvania

Re: Matrix 350se limbs

Post by whoay » Thu Aug 10, 2017 4:52 pm

should I even worry about this it on the right side inside

whoay
Posts: 36
Joined: Mon Sep 12, 2016 11:04 am
Location: Pennsylvania

Re: Matrix 350se limbs

Post by whoay » Thu Aug 10, 2017 4:55 pm

here it is.....
Attachments
20170810_174647 (1) (640x480).jpg
here it is...

User avatar
ROGER THAT
Posts: 194
Joined: Sat Apr 06, 2013 2:26 pm
Location: Northern N.J.

Re: Matrix 350se limbs

Post by ROGER THAT » Thu Aug 10, 2017 6:25 pm

Shoot it if your happy with the speed and accuracy :D :D :D
I had the same thing on my bulldog 400
Look at right side limb in the picture Image
>>====>
Work Hard Hunt Harder
Matrix 380 Xtra (Serenity)
Matrix 405 (cwn annwn)
Matrix Bulldog 400 (Acwellen)
Matrix Grizzly (Armel)
Micro 355 (Siofra)

Trentco1
Posts: 135
Joined: Mon May 02, 2016 8:42 pm
Location: Southern Ontario/Toronto

Re: Matrix 350se limbs

Post by Trentco1 » Thu Aug 10, 2017 9:43 pm

If ur not going to do warranty claim your best bet would be to order yourself a set blemish limbs for $80 bucks you can't go wrong. God for bid something should happen during hunting season and your without a bow you're not gonna be a happy camper....
Micro 355
Hawke xb30 pro scope T&T Triger boo force 10 string Zombie slayers 16.5 arrows c/w right helical blazer vanes aluminum nocks or lumenoks
Micro 315
Tact zone scope force 10 string 16" inch executioner arrows aluminum nocks or lumenoks

User avatar
L. E. Carroll
Posts: 1193
Joined: Sun Apr 26, 2015 4:32 pm
Location: La Center, WA

Re: Matrix 350se limbs

Post by L. E. Carroll » Fri Aug 11, 2017 1:39 am

My 350 SE has been holding up to plenty of shooting with no issues at all... I have other Excals and really find myself picking this one most often when going out to play on my 3D range.

If enough time is available before your season opens ? I would personally return them for replacement under warranty asking that they do the replacements with limbs in the correct matching MOTS camo pattern with the highest deflection numbes they have available. :wink:

If for some reason you do decide to keep and shoot them this season ? I'm pretty sure you can do that with no worries. :wink:

Gene
Camo Micro 335 gen. ll " w/ XB30 SR Pro
Camo Micro 355 w/ XB30 SR Pro & TT trigger
Camo Matrix 380 W/ Crossbones scope & a Boo trigger
all w/Camo Munch mounts
Sweet 44 yr. old 73 Bronco
Scamp tralier

User avatar
robertyb
Posts: 2158
Joined: Mon Feb 06, 2012 8:35 pm
Location: Georgia

Re: Matrix 350se limbs

Post by robertyb » Fri Aug 11, 2017 8:06 am

whoay wrote:should I even worry about this it on the right side inside
To answer your question I shot my splintered limb daily for over a year without any problem whatsoever before getting Dan Miller to swap out the limbs for me while making an order with him for needed supplies. I just broke mine off and did not even sand it down.
Wildlife Population Control Specialist

Arrowflinger
Posts: 330
Joined: Sat Mar 19, 2016 3:51 pm
Location: China Spring, Tx

Re: Matrix 350se limbs

Post by Arrowflinger » Fri Aug 11, 2017 8:53 am

No , your not the first. Thought I might be when I posted not too long about mine.responses were in disbelief but yes it can happen and does. I too baby mine and have never had a dry fire. My first set of limbs lasted a year and I logged in approx. 2800 shots when a splinter appeared. I shot it a while longer but it seemed to be slowly getting bigger, so sent the front end to Danny Miller who very promptly took care of me with new limbs and redid the limb mounting brackets. Unfortunately after receiving those limbs a splinter appeared at 40 shots. Sent it back to Danny who once again very promptly replaced those limbs. So far 70 shots and all seems well. Hopefully I'll get another 2800 or even more on these. Good luck to you .
Matrix 350 LE 18 in. Diablos 150 gr. Boltcutters Zombie Slayers 150 gr. Slick Tricks C2 crank Hawkke XB 30 Pro SR

User avatar
robertyb
Posts: 2158
Joined: Mon Feb 06, 2012 8:35 pm
Location: Georgia

Re: Matrix 350se limbs

Post by robertyb » Fri Aug 11, 2017 4:27 pm

Two limb splinters we know about. No bad when you remember that the reason the 350s came into existence was because the 405s were splintering the limbs right and left because of the over heating problems while applying camo to the limbs. The limbs we have on our 350s are those limbs so I think we are doing well with only two known splinters so far. (knock on wood) :lol:
Wildlife Population Control Specialist

whoay
Posts: 36
Joined: Mon Sep 12, 2016 11:04 am
Location: Pennsylvania

Re: Matrix 350se limbs

Post by whoay » Sun Aug 13, 2017 9:15 pm

Should i open a RMA with Excalibur or can I just call Danny Miller and send it to him to fix....

User avatar
robertyb
Posts: 2158
Joined: Mon Feb 06, 2012 8:35 pm
Location: Georgia

Re: Matrix 350se limbs

Post by robertyb » Mon Aug 14, 2017 12:14 pm

whoay wrote:Should i open a RMA with Excalibur or can I just call Danny Miller and send it to him to fix....
I would call Danny. 740-483-2312
Wildlife Population Control Specialist

Post Reply

Who is online

Users browsing this forum: Alexa [Bot], Bing [Bot], Majestic-12 [Bot] and 34 guests