Excalibur Crossbow Forum

I voted yes on this poll. I dont mind a guest asking a question on xbows or an O/T point, but when they are just trolls its hard to bite your tongue and log off the thread. All the other forums I am on you have to register to put a thread up. It cost nothing but a few minutes of your time to registe...

Oops, the one in the picture is from the old hard case like the one below. The other case has egg shell strips cut the same size. I got the piece of scrap foam from Home hardware. Digger http://groups.msn.com/_Secure/0RwD*AqkUbc4YqlrTD87w0pWixzGeJMOFhbsAtGiwjJ!RvWdgkXTAKnZ5Rt1FGJeUErq71!biAP6ObGLv6B...

Grey Owl, You can get the boxes at Canadian Tire for under $15. I cut some strips of foam rubber for that one and took the bolt holders out of an old hard case for a vert bow. Box is perfect for bolts its 22"x6"x3". bj uses them also, he has at least three of them. they are just utili...

All three weights have four blades.

Digger

While I agree with your first 4 steps , I use an Arizona E-Z fletcher and do all 3 vanes at once so I don't need to nock the bolts. I lightly lube the edges of the vane holder to decrease the vane sticking, once done it dries in 30 seconds, I put a small dab of fletch-tite on the tip of the vane. I ...

I think there is 18 Gary, a dozen with field points six with Slicks. I have another simular box set up.

Digger

bj carried them earlier, you'll have to contact him Hi5 ricochet, makes no difference what broadhead you use as long as you keep over the minimum weight of 350 gr or 325 gr for the Vixen. Mine are on Gold Tip Laser lls, 100s &125 gr heads. Digger http://groups.msn.com/_Secure/0RwDpAksUiLWWLmlKdt...

ricochet, I prefer and do use slick trick 4 bladed broadheads 125 gr. in my Paradox and 100 gr. in the Vixen, they fly as well as any head that I've used. Why spend $60 for heads when slicks are $20 for a set of 3that are as good as any out there. http://www.slicktrick.net/ Digger http://www.slicktr...

I had string silencers on my first Wolverine and first Vixen only because I was given them when I purchaced the xbows. I had Tarantulas on the Wolverine, it made no difference in the sound after 50 shots half the fillements were gone. the Vixen had fuzz busters, they made no difference either, they ...

gad, bj does stock the butler creek type flip ups make sure he knows they are for a varizone. those for drop and max zones are a different size.

Digger

Heres another sight for you.

Digger

http://www.msue.msu.edu/msue/imp/modac/visuals/E657.pdf

If the limb ends on your xbow are less than 1" wide you should be able to use the Excal. stringer. Either of these will do just adjust the length of the string on them. Digger http://groups.msn.com/_Secure/0TwDtAvYY5AB2jViEvVJvvE0ZKZQjG7F5f9c1Oe6DlRjN3j98N11IQHDaoB06rlXPlk7i352S4A54h2P2Nnehwmaq...

They weren't selling accesseries or xbows at the show in Toronto last time I was there,but it seems if theysold parts they would be cutting their distributers throats and theirs. Best bet is to send Excalbur an Email and ask them for sure. But there were 1/2 a dozen boothes that were selling Excal a...

Bfore I sold my Bitz and got an Arizona E-Z fletcher I glued a nock on the end of a 85gr. field point and screwed into the end of the Excalibur bolts. I think you'll find that works as well as anything.

Digger

Your red dot would have to sit an 1" higher than thr Excal. scope to be a hinderance. If your not sure I'm sure Dan could tell you exactly what if any thing will not fit,but I think if it sits on regular mounts & rings it will work.

Digger

Dan's #s
740-483-2312
740-483-2030 (Fax)