Excalibur Crossbow Forum

I got pic pic down to 38kb and now the error is board attachment quota reached.

Can’t see to size the pic to where it will upload. Error
File too large.help?

Thats my rail so it is a 355 sorry guys. I will get the pics up asap. Like I said before, i hunt so I have it a few years by now. Other than the initial setup and sight in, maybe a dozen bolts a season it sees. While i had the limb break early on and now this issue, I absolutely love this bow and wo...

Perfect idea thankyou!

That looks like mine. I stand corrected. I went over the bolts and the nocks several times. Smooth as silk. It’s rather puzzling to me. I will post pics later this week for sure. It’s a painted or coated rail and I had pitting on one of the limbs brand new out of the box. Those limbs failed quickly ...

Due to state regs here I need to shoot a longer 18” bolt. With that my mech broadheads stick out past the stirrup by and inch or so. Do they make a longer stirrup? I’m not able to rest my loaded bow on the floor. Sort of a pain to hold it all the time.

My bow is up at camp now. I will post pictures of it later this week. Until then if anyone can add anything to this, I would be interested. I am unsure about the rail material however this is nothing more than the chipping of the coating in the groove where the bolt lays. It’s not a wearing away but...

Seems my rail finish is chipping. Not the top flat part that contacts the severing but rather the groove that contacts the bolt. Any ideas? It was a piece a few inches long on one side. I used very fine sandpaper to smooth the rough finish. Seems fine but I am assuming it will get worse. Is this som...

Roger that! I will give it hose a shot. Thankyou.

I am using the BE quills. I will try the ZS’s then. I was worried about the plus 1.5 inches and what that does to the spine. If no one else chimes in I will give those a shot. Thankyou

I hunt two states. For legal hunting here in ct, i need 18 inch bolts in my micro 355 instead of the standard 16.5” quills. In nys the 16.5” quill is fine. I am all dialed in with the 16.5 and 150 grains up front. Can someone recommend a particular bolt that should keep me dialed in the same. I can ...

Very happy with the new limbs. Through the chronograph I am getting an average of 322fps with my 400 grain quills. I had very good flight with the magnus stingers in 150grain out to 40 yards.

Thanks for clarifying that. I thought The one bolt to remove the riser made it a takedown. Sorry for my misinformation.
I just put a few magnus stinger 150’s through it with very good results. Since I have alot of them, I will stick with that for now.

Thanks guys. Never hurts to be sure. This is a great forum. Thanks.

Boo wrote: ↑

Fri Jun 25, 2021 12:27 pm

If you email it to me, I will post it for you.
To my knowledge, there is no 355 Suppressor TD.

Email sent
Thankyou.