Excalibur Crossbow Forum

Has anyone tried the Zinger fletching in their Excal?

Wac-Em 3 blade crossbow 100 grain. Same poi as my field tips.

I looked through one at Cabelas and was very impressed.

I would go with the off set, especially if you are going to leave it up for a while. It's more stable, it can handle a crooked tree, and it sits out from the tree a little bit, The E-Z Hang is more for a run and gun type of hunting.

W.Miguire wrote: ↑

Wed Feb 21, 2018 12:30 pm

If you folks are looking for inserts there is a firm that makes them . Try , www.ethicsarchery.com 980 429 2070 they will set you up . I have been using them for a long while now . [ spinning insert]
W.M.

Which one of their inserts would fit a 2219?

Sorry, but a guy from Wi. asked for it first, so I 'm sending it him. Also on the Dr. Stirrup website it shows a different one for the Matrix and for the Grizzly. They do look the same though.

I have a Dr. Stirrup that Gaston gave me. It's for a Matrix model. I bought a Micro and gave my Matrix to my best friend. He prefers not to use the Dr. Stirrup so it's available to someone who wants to try it.

I had a Hawke XB30 Pro scope and thought the glass was pretty good until I compared it to my VX11 at low light. I sold the Hawke and bought a VX111 1 1/2x 5 with the heavy duplex reticle. Most of my shots in Michigan are 30 yards and under, so I sight in at 25 and don't really worry about the range....

I had a XB30 and thought the glass was good until I compared it to a Leupold at low light one morning. I sold the Hawke and put a Leupold VX111 with a heavy duplex on my 335. I sight in at 25 yards and don't really worry about the range. Most of my shots are 30 and under. Also, I can still see the h...

I shoot 16" BEE's and 2219's out of my 335 and they fly just fine.

16 BEE's, 110 grain insert, 100 grain head, Blazers, and a Lumenok. One hole groups at 30 yards with my 335. Also with 16 " arrows, a Swhacker will fit inside the stirrup on a 335.

There maybe some that have them that short. I run mine 16-16 3/4", have had some good groups usin 170 gr Zwickey No Mercy fixed 2 Blade B-heads out of mine Do they already have the screw in inserts or do you glue them suckers on? I used to use the 110 grain 4 blade Black Diamonds during the co...

I'll be getting a new 335 Micro soon, also some Zombies from Jerry. What's a good length to have my shafts cut to. Does anyone go as low as 15" and still get good flight with fixed broadheads? I'll be fletching Blazers with the Bolt Jig. Thanks

I cut an inch out of a micro stock for my wife. I took an inch out of the bottom rear of the stock and an inch out from under the cheek piece. I then drilled all pieces to insert pins. This is a little tricky, but what I did was glue the pin into one side and then oval or over size the other side a...

Any ideals on how to shorten a Matrix stock by about an inch. Thanks