Excalibur Crossbow Forum

Well the bow was not strapped down, as a matter of fact it was resting very loosely and there was no extra weight in the sled. Might , just might want to consider there could be a problem with the epoxy job(s). Mine is not the only one that has lost a limb tip for whatever reason. Upon close examina...

Normal !

There was no warning with my 405. I shot 4 arrows, all in a 1" dot at 30 yards, then the 5th shot I heard something hit the side of my truck about 15 feet away. I started looking and saw the new string (maybe 25 shots) cut badly on the serving at the loop on the left limb. A piece of the tip ha...

My 405 did the same thing this morning. This is not the only issue I have had with this bow. I am truly disappointed in this bow, so much so that I have also thrown in the towel and ready to move on. The bow has been down for one reason or another more than it's been working. I will not bash Excalib...

My 405 does that a lot. You may have to pull the trigger again so it can reset and then re-cock the bow. Just make sure the safety is in the fire position.
Good Luck

My 405 does that a lot. You may have to pull the trigger again so it can reset and then re-cock the bow. Just make sure the safety is in the fire position.
Good Luck

Yep, done that twice. Once with acetone and once with alcohol. Re did everything again tonight, will let it set till Friday or Saturday and try again.

Don't want to strip them out. I know the lock washers on the trigger assembly are far past flat plus the Loctite. It will stay together about 30- 40 +/- shots then the groups start stringing out mostly downward.

I can't keep them or the screws that hold the anti dry fire tight in my 405 even with blue Loctite.

Just checked my 405, they also were already pre-ground approximately half way.

Mine was recently replaced because of another trigger issue, wonder if it will need to be shipped back again ?

Good to know, I haven't tried them in my quiver yet, but they shot extremely well out of my 405.

Anyone tried or have any experience with the 100gr 2 blade Raven broadheads and their crossbow(s)

The 405 is a feather compared to some of the old Wheels, Cams and Cables I have shot in the past !!!!!!!!!!!!!!!

Hard to come by and expensive here in south Mississippi as well. Saw some off brand standard velocity LR's at a recent gun show (500 brick) for $100.