Excalibur Crossbow Forum

anyone know where you can buy such a nock?

i'm just getting into making my own bolts and i'm thinking about using wraps. i see they come in 1" and 1.25"

gold tip series 22 press in nocks fit perfect

i just ordered some press fit nocks to fletch my bolts. i got them from bowhunterssuperstore.com. i ordered nocks for the gold tip 22 series. i hope they fit.

just a heads up, i ordered a bitzenburger jig and a crossbow nock adapter for an extra 18 bucks. nothing but probllems as i can't get a shaft to even come close to fitting inside the crossbow adapter. the o-ring is way too small and if i remove it the arrow will not turn in the jig. i think what i'm...

you can just give them the whole bone or pieces of it. as long as its raw it will not splinter, they gnaw it down. you should freeze all bones solid to kill off any bacteria first. be forwarned though that the the raw bones will give your dogs the shits because of all the raw fat. and it will stain ...

i'm also going to try making my own bolts. try bowhunterssuperstore.com they have it all. but you might want to look into the laser 2 shafts instead of the 2216. the laser 2 shafts sell for only $44 a dozen and they come with both brass and aluminum inserts as well as aluminum flat nocks.

what i had to do to remove a few of the aluminum inserts was to put a field point on the shaft then hold the field point over a candle flame to heat up the insert and soften the glue. it took as much as a minute to get the insert to come out with pliers but there was no damage to the shaft. i then b...

i was driving 2 days ago through my home town in suburban nj when i noticed a tom turkey standing on a neighbors front lawn. when i tried to take a cell phone picture of the bird, it ran down to my car and proceeded to peck at my door. when i rolled down my window and yelled at it, it just stood the...

i've recently ordered brass gold tip inserts in an attempt to use them in stock firebolts that i've recently purchased. the brass inserts are about a 1/4 inch longer than the stock firebolt inserts which appeared to have been glued with a black colored epoxy. when i tried to install the brass insert...

brother, that's what it's all about. god blessed me with a little girl 2 years ago and i cannot wait until she's old enough to go out hunting with me.

i know a guy who shot a borderline B&C buck awhile back that just made the book by less than an inch. his taxidermist told him to freeze the rack for the 60 days before it was measured as it will prevent the rack from shrinking. i don't know if it's B&C legal though.