Half moon drivers

Crossbow Hunting
Post Reply
frydaddy
Posts: 113
Joined: Thu Sep 20, 2007 9:10 pm
Location: Screven Ga.
Contact:
Contact frydaddy

Half moon drivers

Post by frydaddy »

:?: Are half moon drivers ok to us with my excalibur?
Well i didn't wake up on the Coolen board.
Top
User avatar
wabi
Posts: 13443
Joined: Wed Oct 09, 2002 9:21 pm
Location: Ohio

Post by wabi »

Half Moon Nocks are not recommended for the Excaliburs. They are not necessary with Excalibur's string release (top latching claws) and the chance of a dry-fire condition caused by mis-orientation of a half moon nock is always a possibility.
wabi
Top
dick195252
Posts: 3084
Joined: Sat Aug 04, 2007 1:57 am
Location: McEwen Tennessee

Post by dick195252 »

I would stick with the Flat nocks
Exomax, Lumizone, Boo String, NRA, ACf, Member, [Proud Grandpa!!!]
Top
frydaddy
Posts: 113
Joined: Thu Sep 20, 2007 9:10 pm
Location: Screven Ga.
Contact:
Contact frydaddy

Thanks guys

Post by frydaddy »

:) Thanks guys for your help. Walmart has good deal on some
bolts that's why i ask. They have moon nocks , so i figured i would
check and see what yall said. :) frydaddy
Well i didn't wake up on the Coolen board.
Top
Rich
Posts: 1512
Joined: Tue Mar 14, 2006 8:33 am
Location: Woodford, VA

Post by Rich »

If it's a good deal, buy them and pull out the halfmoon and replace with flat nocks or inserts.

Rich
Top
frydaddy
Posts: 113
Joined: Thu Sep 20, 2007 9:10 pm
Location: Screven Ga.
Contact:
Contact frydaddy

Deal

Post by frydaddy »

:) I am, to good of deal. Will keep me in bolts for years. :)
Well i didn't wake up on the Coolen board.
Top
Post Reply

Return to “Crossbow Hunting”