Rope Cocking Aid - wear
Moderator: Excalibur Marketing Dude
Rope Cocking Aid - wear
I'm wondering if anyone else is noticing wear on the area behind the safety from their rope cocking aid being used to unload their bow after the hunt. The plastic stock "string groove" is wearing from repeated unloadings, and I'm wondering if there is a way to avoid this.
Anyone else experience this?
Korey
Anyone else experience this?
Korey
shoot it off ...again, again and again!
I got tired of having to use the cocking aid to un-cock the bow. I keep a crappy bolt that the fletching is "F@#$'ed" up on in the quiver and shoot it into the ground at the end of a hunt.... if I'm skunked... gives me some practice on range from the stand... and that's more times than not.
I love to hear the "th-whack" of the exomax!
Frank
I got tired of having to use the cocking aid to un-cock the bow. I keep a crappy bolt that the fletching is "F@#$'ed" up on in the quiver and shoot it into the ground at the end of a hunt.... if I'm skunked... gives me some practice on range from the stand... and that's more times than not.
I love to hear the "th-whack" of the exomax!
Frank
Frank and a 2005 Exomax
Wow...surprising to see how many of you actually discharge the bow rather than unload it with the rope cocking aid or by hand. I used to do it by hand, but as the bows progressed in draw weight in recent years, it's become too tough on the hands! I thought the move to the rope aid was the ticket, until I began noticing the wear. I like having four broadheads in the quiver, just in case, so I don't see myself shooting a bolt each time to unload, especially after an evening hunt, and it's getting dark...might be tough to find the bolt!
Many others use the rope aid?
Many others use the rope aid?
Re: Rope Cocking Aid - wear
korey99 wrote:I'm wondering if anyone else is noticing wear on the area behind the safety from their rope cocking aid being used to unload their bow after the hunt. The plastic stock "string groove" is wearing from repeated unloadings, and I'm wondering if there is a way to avoid this.
Anyone else experience this?
Korey
SHOOT a DEER everytime out and you wont have that problem!
Thanks fdegurse, but I hunt a lot from ground blinds. Perhaps a little wear on the stock isn't the worst thing in the world from unloading the Vixen. I'd also prefer not to make as much noise from shooting when I can use the rope aid to do it a bit quieter......don't want the big guy to pinpoint me for my next visit!
Thanks.
Thanks.
-
- Posts: 60
- Joined: Fri Sep 26, 2008 8:39 pm
- Location: s ontario
I did shoot an old aluminum bolt into the ground right beside my truck - that is until I did it into the snow and did not realize how deep the ditch was. Lost the bolt and could not find it in the spring. Don't want to do it with my graphite bolts so I use the cocking aid. I would not worry about a little camo coming off or a little wear - unless you are looking at using the bow for 100 years or more I doubt you will see any adverse effects from the little wear.
You could likely but a little bit of tape (duct tape cures all) and change it every so often if it really bothers you.
You could likely but a little bit of tape (duct tape cures all) and change it every so often if it really bothers you.
-
- Posts: 43
- Joined: Fri Jan 05, 2007 9:29 pm
- Location: Ottawa, Ontario, Canada