Wood Stock
Moderator: Excalibur Marketing Dude
-
- Posts: 2411
- Joined: Tue Mar 25, 2003 11:32 am
- Location: North Carolina
Ok, I am going to throw my hat into the ring.
I have a few projects in front of this, One piece strikers (almost complete)
and a one piece box call and deer grunt tube (almost complete). I can re-arrange some priorities to make this happen. I'll push out one piece call and insert this one.
The starting question would be as follows:
I have a Exomag, how many different types are we looking at?
Could one stock fit all, or at least close?
What woods are we looking at? Walnut, Oak and Maple.
And the loaded question, What will the market bear price wise?
I have a few projects in front of this, One piece strikers (almost complete)
and a one piece box call and deer grunt tube (almost complete). I can re-arrange some priorities to make this happen. I'll push out one piece call and insert this one.
The starting question would be as follows:
I have a Exomag, how many different types are we looking at?
Could one stock fit all, or at least close?
What woods are we looking at? Walnut, Oak and Maple.
And the loaded question, What will the market bear price wise?
Last edited by bucont on Tue Jun 02, 2009 9:50 pm, edited 1 time in total.
Axiom SMF
Munch mount
MeadowBrooke Game Calls
LCCA
Munch mount
MeadowBrooke Game Calls
LCCA
would it be finished stocks or blanks?bucont wrote:Ok, I going to throw my hat into the ring.
I have a few projects in front of this, One piece strikers (almost complete)
and a one piece box call and deer grunt tube (almost complete). I can re-arrange some priorities to make this happen. I'll push out one piece call and insert this one.
The starting question would be as follows:
I have a Exomag, how many different types are we looking at?
Could one stock fit all, or at least close?
What woods are we looking at? Walnut, Oak and Maple.
And the loaded question, What will the market bear price wise?
If guns cause crime, all of mine are defective
-
- Posts: 4791
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Just doing some quick research on wood. Gunstock grade Walnut board runs from $35 to $100 US plus shipping depend on the finish grade. It is not cheap for sure.
Quilted maple runs in the same price range as well.
Are we still thinking this is still do able?
A finshed stock should run from $250 on the low end and go up from there based on the wood choice.
Quilted maple runs in the same price range as well.
Are we still thinking this is still do able?
A finshed stock should run from $250 on the low end and go up from there based on the wood choice.
Axiom SMF
Munch mount
MeadowBrooke Game Calls
LCCA
Munch mount
MeadowBrooke Game Calls
LCCA
- one shot scott
- Posts: 7030
- Joined: Wed Sep 10, 2008 10:20 pm
- Location: Ontariooh ohh
- Limbs and Sticks
- Posts: 3206
- Joined: Mon Sep 01, 2008 7:13 pm
- Location: Colonial Beach, Virginia, US
post sub
I know I would want one, ground pounder got one and I was to late on the other one
Wes
Wes
"Maxine"
1.75x5 Burris scope
Boo string
STS
Feathered easton 2020's
Magnus stingers
1.75x5 Burris scope
Boo string
STS
Feathered easton 2020's
Magnus stingers
The trick here is the wood needs to be well dried before you start. Therefore a lumberyard wood will not cut it. It must be rough cut and then it must sit to dry further otherwise you will get warpage on the finished cut and that is not good at all.
I'll make an attempt on my bow and see how it goes. This will take months not weeks so please hold on. I'll keep posting to let every one know the progress.
I'll make an attempt on my bow and see how it goes. This will take months not weeks so please hold on. I'll keep posting to let every one know the progress.
Axiom SMF
Munch mount
MeadowBrooke Game Calls
LCCA
Munch mount
MeadowBrooke Game Calls
LCCA