max broadhead diameter

[supertuck]

I bought slicktrick grizz tricks this year and noticed if I slide the bolt out the blades rub the sturrup is there a max cutting diameter for an excocet .if i rotate the bolt just so the blades barley clear the sturrup

[one shot scott]

I also use the grizz tricks with my Y25 and I have not noticed that, im going to check it out and see how much clearance I have.

[one shot scott]

I have 5.17mm of clearance(.2"). I am using the 1 1/4" grizz tricks. More than enough room that it wont contact on my bow. It seems to me that when I last installed my stirrup that there was a little bit of up and down play. can you loosen the bolts and slide the stirrup down slightly to gain more clearance?

[rt2bowhunter]

I have .210" clearance on my Ibex.That's with one blade straight down Also 100gr Grizz Trick.

[Doe Master]

I have to ask . Is it a slightly older bow ?
If it is then it is possible that the stirrup has been put on upside down . The older stirrups were cut on an angle .

[supertuck]

Ithink it is a 2005 I will have to see if it is backwards.I want to thank everyone for the quick replies I love this forum you are all aces!

[supertuck]

I also wanted to say love the grizz tricks nice big cut but both deer I shot this year were high lung shots I was thinking maybe stirrup rubbing caused this although both deer only went 20y and 40y and heard both crash so I cant really complain

[vixenmaster]

I ran into the blade hitting the stirrup on my older vixen. BH was a Montec Striker 1 1/2" & i had to index it so 2 blades down at 60 degrees to clear. Not what i want in the dark in my stand having to make sure 2 blades down with cold bare fingers on the business end. I shoot the 3 blade Snuffer 125 gr they clear.