STS WITH GROUNDPOUNDER HELP

JB2010 · Post by **JB2010** » Thu Jun 16, 2011 11:34 pm

I was wondering if anyone has any pics or tips on how to install them and still have the ground pounder mount work. Last time I was on here I read about people having to manipulate parts a little. Whats the best way to do it? Thx

Dereck · Post by **Dereck** » Fri Jun 17, 2011 5:43 am

Longer bolts to pass thru the STS from the bottom then screw the rods for the groundpounder onto the screws

Here is a Munch mount done this way

munch · Post by **munch** » Fri Jun 17, 2011 6:30 am

if you cut and paste this like you will find a video to show how i do it
http://www.youtube.com/user/munchmounts

ONEOFAKIND · Post by **ONEOFAKIND** » Fri Jun 17, 2011 7:49 am

I talked to munch last night about the same set up for the S5. Thanks, munch for the reply. I hope postal strike ends soon,

groundpounder · Post by **groundpounder** » Fri Jun 17, 2011 1:38 pm

Others have already answered for you but I will too. You will need 2 bolts that are 5/16-18 thread and are 1-1/2 inches long. Run them through your STS and get them tight. Now pass the extended bolt up through your riser and screw my post down onto the bolt. Get this as tight as possible by hand. Repeat with the other side. Then bolt on the top plate. Some people have chosen to drill out the threads in their STS for the bolt to pass straight through. While this is an option I do not feel it is necessary. Let me know if you have any other questions. Todd.

JB2010 · Post by **JB2010** » Sun Jun 19, 2011 5:31 pm

Thx guys. very helpful info!!

Excalibur Crossbow Forum

STS WITH GROUNDPOUNDER HELP

STS WITH GROUNDPOUNDER HELP

Re: STS WITH GROUNDPOUNDER HELP

Re: STS WITH GROUNDPOUNDER HELP

Re: STS WITH GROUNDPOUNDER HELP

Re: STS WITH GROUNDPOUNDER HELP

Re: STS WITH GROUNDPOUNDER HELP