need some advise

[BBDOWN]

last night I had a doe at 30yrds.I took my time got settled in and let her fly, the bolt went left about 10 feet ahead of her. after that I found that there are 2 little black spacers under the limbs that hit the vains thank god I missed the deer I could have hurt her, How do I get these spacers to stay in place? I put them where they are suppost to be and after three shots they were on the move again. Would glue hurt or void my warrenty? I don't want that to happen again.

[Normous]

Cut the exposed black plastic spacer with a sharp blade. The plastic shim should not extend into the riser valley.

[sumner4991]

If you are talking about these things sticking out from the limbs, then trim them off with box cutters or a good knife. Your riser area should be clear like that in picture #2 below.

With the black shims . . .



Without them . . .

[BBDOWN]

Thanks guys I'll give that a try. Should I put a drop of glue on them to keep it from happening again?

[VixChix]

You shouldn't need glue. Just trim 'em up and go shoot deer!

[sumner4991]

Can you post a picture? I'm not sure how these things would move unless the screws are loose . . .

[BBDOWN]

I already trimed them down, but I made sure the screws were tight and put a little locktight blue on them. I should be good to go,leftys still out there and tomorrow if he within 40yrds hes going to get a meat missle in him.Thanks for your help

[Normous]

Shoot some targets before you hunt again, in case something else is amiss.