looking to get my arrow shaft componets and seen these Bohning 1.75" Shield "X" Vane at .40" high where the 2" are .60" high....my thought is positive channel clearence over the 2" blazers....but i'm not sure if the 1/4" less length will hurt, i mean a 1/4" isn't that much or is it on a vanes with slicl tricks....plus i'll save a little weight on the rear of my arrows as well, 2" are 6gr each and the 1.75" are 3.5gr yet shaving 7.5gr off rear of arrow....there only 12 bucks a 100 but don't want to lose any flight my arrows have with 2" blazers....i'll have a close up look at my rail channel and vanes 2" i have now for any rub marks....just short of trimming the 2" to clear the channel which i did do to see if there were any difference which i couldn't see anything, thx guys .........bob
....
blazer 1.75" vanes..........
Moderator: Excalibur Marketing Dude
blazer 1.75" vanes..........
exocet 200. STS dampers.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
- Limbs and Sticks
- Posts: 3206
- Joined: Mon Sep 01, 2008 7:13 pm
- Location: Colonial Beach, Virginia, US
Re: blazer 1.75" vanes..........
Move them back on the shaft as far as you can, you shouldn't have any flight or clearence what so ever.
Wes
Wes
"Maxine"
1.75x5 Burris scope
Boo string
STS
Feathered easton 2020's
Magnus stingers
1.75x5 Burris scope
Boo string
STS
Feathered easton 2020's
Magnus stingers
Re: blazer 1.75" vanes..........
i just measured my rail channel and it was .635..so either way you should be good..i shoot the 2 in and never had a problem
Exocet 200
S5 string stoppers
3x Proview
ComfyBear string
2219,s Blazer vanes, Muzzy 3 bld 125,s..they fly straight
John 3:16
S5 string stoppers
3x Proview
ComfyBear string
2219,s Blazer vanes, Muzzy 3 bld 125,s..they fly straight
John 3:16
Re: blazer 1.75" vanes..........
you run into the trigger block if too far back on shaft....i had the guy at pro shop mount my 2" blazers 1" from end of shaft where 3/4" was touching the block....but my main thought i need answered is the shorter vane by that 1/4" will do.....bobLimbs and Sticks wrote:Move them back on the shaft as far as you can, you shouldn't have any flight or clearence what so ever. Wes
....
exocet 200. STS dampers.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
- Limbs and Sticks
- Posts: 3206
- Joined: Mon Sep 01, 2008 7:13 pm
- Location: Colonial Beach, Virginia, US
Re: blazer 1.75" vanes..........
bob1961 wrote:you run into the trigger block if too far back on shaft....i had the guy at pro shop mount my 2" blazers 1" from end of shaft where 3/4" was touching the block....but my main thought i need answered is the shorter vane by that 1/4" will do.....bobLimbs and Sticks wrote:Move them back on the shaft as far as you can, you shouldn't have any flight or clearence what so ever. Wes
....
I use 3 or 4'' shield cut feathers and they are 3/4'' from rear of shaft, I also cut scope mount for clearence, I've never had any probs with this set up be it vanes, blazers or feathers, maybe do a little testing
Wes
"Maxine"
1.75x5 Burris scope
Boo string
STS
Feathered easton 2020's
Magnus stingers
1.75x5 Burris scope
Boo string
STS
Feathered easton 2020's
Magnus stingers
-
- Posts: 359
- Joined: Tue Nov 04, 2008 5:35 pm
- Location: Woodstock. Ontario
- Contact:
Re: blazer 1.75" vanes..........
have you tried the zeon fusion vans, if you go to their web site you can get 9 fleches sent to you for free they are like lumiocs but the fleching lights up all thetime, i love them
Pro-staff for team gobblestalker
pro-staff at Turkey tuque
DUCKS UNLIMITED CANADA
Turkey callers of canada
http://www.gobblestalkercalls.com
type1 diabetic since 2003
mike schnarr :P
pro-staff at Turkey tuque
DUCKS UNLIMITED CANADA
Turkey callers of canada
http://www.gobblestalkercalls.com
type1 diabetic since 2003
mike schnarr :P
Re: blazer 1.75" vanes..........
yeah they are like a fiber optic vane.......bob
....
....
Last edited by bob1961 on Fri Jan 20, 2012 10:59 pm, edited 1 time in total.
exocet 200. STS dampers.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
Re: blazer 1.75" vanes..........
youngbuck1 wrote:have you tried the zeon fusion vans, if you go to their web site you can get 9 fleches sent to you for free they are like lumiocs but the fleching lights up all thetime, i love them
I'm gonna check that out youngbuck. I shoot the 3" Fusion vanes now and like them very much. I'd like to try the Zeons and see how I like them. Do you shoot them from a crossbow or a compound? Just wondering how well they'll fit in the rail channel.
Gun control is like trying to reduce drunk driving by making it tougher for sober people to own cars.
Vortex
Trigger Tech 2.5 Trigger
ShadowZone Scope
S5 with dB Killer Bumpers
Boo String
Big John Zombie Slayers
Rage Broadheads
Vortex
Trigger Tech 2.5 Trigger
ShadowZone Scope
S5 with dB Killer Bumpers
Boo String
Big John Zombie Slayers
Rage Broadheads