Top Quiver Mount

FNARSCOT · Post by **FNARSCOT** » Fri Sep 27, 2013 4:45 pm

I want to make my own top quiver mount. How high do the mounts made by others put the quiver. I am going to make one for my 380 Matrix but want a 2 point mount that mounts the quiver side to side like Danny Miller but mounts like a Munch. Much rather start from scratch then modify. It would be for me by me.

LongCarbine · Post by **LongCarbine** » Fri Sep 27, 2013 4:51 pm

I make mine 2 1/4 " high .

munch · Post by **munch** » Fri Sep 27, 2013 6:23 pm

most of the guys i'm selling mounts to for the new matrix bows are using 2.5" posts if your using an hha on your bow you will need 3" munch

FNARSCOT · Post by **FNARSCOT** » Sat Sep 28, 2013 4:29 pm

thanks

FNARSCOT · Post by **FNARSCOT** » Wed Oct 09, 2013 10:43 am

I made my quiver mount today. 3" off the deck. QD bracket centers up over left side hole,(stock Excalibur bracket that comes with matrix),up rites are alloy tube pressed into 7/16" hose,1/8" alloy plate 1 1/2" wide crosses from left hole to right hole to stop rotation of mount. counter sunk bolts on top, allens from bottom. Quiver is mounted side to side like Danny Millers but mount to bow like a Munch. I built this out of scrap Harley pushrods, a piece of old road sign, and some hardware laying around the shop and 6" of 7/16" hose ( About $1.00.) Do to the height of the mount and the narrow cross mount loading the bow was unaffected. The 3" height was suggested my Munch to clear a HHA (Thanks Munch) It looked high at first but handles great .I shot 15 times after I made it and it seem to quiet the bow even more with the bridge effect of the mount and the rubber over the up rites. I'm Happy

Also found out that the Scope Coat that comes with a Issue Acog fits the Tac-Zone scope that comes with a Matrix. Much better than the stock flip up covers .Some day I will learn to post pictures. Cool front is moving in hope to hunt this week.

Peacemaker · Post by **Peacemaker** » Wed Oct 09, 2013 1:37 pm

THIS....THREAD......NEEDS.......PHOTOS!!!!!!!!

Backstraps · Post by **Backstraps** » Wed Oct 09, 2013 1:45 pm

Would love to see photos of this as well.

FNARSCOT · Post by **FNARSCOT** » Wed Oct 09, 2013 1:51 pm

How do you post photos? Really I'm better with a welder than a computer

munch · Post by **munch** » Wed Oct 09, 2013 5:30 pm

FNARSCOT wrote:How do you post photos? Really I'm better with a welder than a computer

if you email a pic i can post it for you
[email protected] or just send it to my cel phone 519 403 9996

FNARSCOT · Post by **FNARSCOT** » Thu Oct 10, 2013 8:31 am

Pics sent to Munch for posting .Thanks Munch

munch · Post by **munch** » Thu Oct 10, 2013 8:15 pm

FNARSCOT wrote:Pics sent to Munch for posting .Thanks Munch

did you send more than one pic. all i got was one munch

FNARSCOT · Post by **FNARSCOT** » Fri Oct 11, 2013 7:45 am

Yes I will try again .
Thanks Scot

Excalibur Crossbow Forum

Top Quiver Mount

Top Quiver Mount

Re: Top Quiver Mount

Re: Top Quiver Mount

Re: Top Quiver Mount

Re: Top Quiver Mount

Re: Top Quiver Mount

Re: Top Quiver Mount

Re: Top Quiver Mount

Re: Top Quiver Mount

Re: Top Quiver Mount

Re: Top Quiver Mount

Re: Top Quiver Mount