I have a set of monsterjax limb dampners that weigh 334 grains/pair.
can someone give me a ballpark estimate on speed loss if i place these on my equinos limbs ???------- thanks
bowjax monsters-- weight & speed loss
Moderator: Excalibur Marketing Dude
Re: bowjax monsters-- weight & speed loss
I do know that the further you mount them from center riser the more velocity you will loose and if you can get them to stick (especially more difficult the further out you mount them) you will loose some FPS but how much depends on their placement.
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Re: bowjax monsters-- weight & speed loss
I put them on my set-up,,,my set up was shootin 296fps I then installed the bow jax and some S-5's on my forward riser and now I am shootin 286-288 fps,,,,pleny fast for me and they have both made pleasing improvements in reducing the amount of noise and vibration I get,,,,I cleaned my limbs very good with alcohol and positioned them from center limb point to the outside about 2 inches,,pressed them in real good,,letum sit overnite,, I haven't had any problems at all after considerable shooting ,,,hope this helps in your decision making
Cub *TactZone * Trigger Tech (AKA Cub-Pow)
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string
Re: bowjax monsters-- weight & speed loss
thanks for the info !!