Just because I've been asked 3 times last week, I thought I'd repost my designs. Of course feel free to copy them.
They are great for serving a string or simply getting the creep out.
This is the easiest, most simple but very strong design and can be knocked down and stored as a very small package. You can add feet for a table top or hinge it to a wall.
This one is better in that the flex in the lower horizontal bars maintain tension where as the above does not aford much.
Easy to build as I built one from your website designs and works great. Been using it for the past 3 yrs for reserving and work on strings. Thanks for the designs.
Exomax w/S 5
Varizone
BE 20" Zombies
Slick Trick 100's
Boo, or anyone else who has made one of these jigs, can you please post the size and gauge of the steel tubing that should be used in the second design?
Thanks for your help.
I built one a couple weeks ago with the directions off of Boo's site. I did make mine a little shorter for the Matrix strings. Started serving my own strings with help from Boo and Danny Miller. It works great and my serving jobs our turning out real good.
Thanks to Boo and Danny Miller
Charlie
Matrix 405 with Leupold VX-R FireDot duplex
Matrix 380 Xtra with Leupold VX-R FireDot duplex
Matrix 330 with Leupold Crossbones
TriggerTech Matrix hunter 2.5 in all 3
Black Eagles
[quote="xcaliber"]Here is one i made with Uni-track, and welded end brackets. The clamping table is from Keter, and i use it for all kinds of projects.