...I am looking to shoot the following configuration with my 335 Nightmare" :
....the only thing that I am not sure of is whether to stay with the 16.5 inch arrows or cut em down to 15 or 15.5"...this is what I come up with the cut down version (using the Gold Tip Academy Calculator):
15":
ZS 15x 9.1= 136.5 g,
Insert= 92 brass-lock 'n loads= 92g,
100g Spitfire MAXX= 100g,
Nocks- NuFletch Ignitors= 39g,
Low profile vanes= 3.1g/vn= 9.3g
Total 376.7g, FOC=18.6%, KE=91.1 at 330fps
15.5":
ZS 15.5x 9.1= 141.1 g,
Insert= 92 brass-lock 'n loads= 92g,
100g Spitfire MAXX= 100g,
Nocks- NuFletch Ignitors= 39g,
Low profile vanes= 3.1g/vn= 9.3g
Total 381.37g, FOC=18.4%, KE=92.2 at 330fps
Anthony
335 Nightmare "arra" configuration
Moderator: Excalibur Marketing Dude
335 Nightmare "arra" configuration
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: 335 Nightmare "arra" configuration
Its all personal preference on how long you want them. Stick out beyond the stirrup or not. Me im going to 16" everything i have but the shwackers will be inside.
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Re: 335 Nightmare "arra" configuration
15" works well for me Anthony. Now that I'm trying the 100 grain Spitfire Maxx, 15.5" will do fine as well. That's what I like anyway!
It’s not the way you rock, it’s the way that you roll!
Re: 335 Nightmare "arra" configuration
Dan, did you try Slick Tricks at all 100 or 125 gr.xcaliber wrote:15" works well for me Anthony. Now that I'm trying the 100 grain Spitfire Maxx, 15.5" will do fine as well. That's what I like anyway!
Matrix 355
Trigger Tech two stage trigger
ADF scope mount
Hawke XB30 1.5-5x30mm SR compact scope
BEE's 18" arrows
Cheek piece
Matrix suppression system
Broadheads 125gr. Slick Tricks
Xcaliber custom strings
Trigger Tech two stage trigger
ADF scope mount
Hawke XB30 1.5-5x30mm SR compact scope
BEE's 18" arrows
Cheek piece
Matrix suppression system
Broadheads 125gr. Slick Tricks
Xcaliber custom strings
Re: 335 Nightmare "arra" configuration
I shot the 125 Gr. on a 16" Gold Tip Laser 2 Pro with 110 brass in front and aluminum nock, and hard twist Blazers. They went into the same hole as the field points out to 30 yds. Have not tried them beyond that distance. I an thinking about trying some BE Zombies at 15 or 15 1/2. I am staying with the Slick Tricks.
Micro 335 Camo
Micro 335 Nightmare
Black Eagle Zombies
Spynal Double Tapps
Slick Trick Mag
Wac'em Broadheads
DeerBoy Strings
Xcalibur Strings
8-PtBuck Strings
Nikon Bolt
Micro 335 Nightmare
Black Eagle Zombies
Spynal Double Tapps
Slick Trick Mag
Wac'em Broadheads
DeerBoy Strings
Xcalibur Strings
8-PtBuck Strings
Nikon Bolt
Re: 335 Nightmare "arra" configuration
No, I'm a big fan of anything NAP. My buddy uses Slicks, Griz Trix. I might have to give some a try.
It’s not the way you rock, it’s the way that you roll!
Re: 335 Nightmare "arra" configuration
I'm shooting 15" Laser III's with 125 field point, 110gr insert and hard twist Blazers with great success
- StormDragon
- Posts: 526
- Joined: Mon May 12, 2014 2:05 pm
- Location: South Jersey
Re: 335 Nightmare "arra" configuration
I'm thinking about getting a nightmare in the near future.
My question is, I already have BEE'S from BOO for my 355 (that I'm looking at trading in/selling) .
The BEE's are 18in with 110 gr Brass inserts and high right helical blazer vanes and NuFletch Ignitor Nocks. I use 100 Gr Grim Reaper X-Bow Razor tips or 100 Gr Grim Reaper Hybrids.
What length/weight/adjustments do you think I should ask the local shop to make the BEE'S if I use them for the Micro?
Thanks in advance
My question is, I already have BEE'S from BOO for my 355 (that I'm looking at trading in/selling) .
The BEE's are 18in with 110 gr Brass inserts and high right helical blazer vanes and NuFletch Ignitor Nocks. I use 100 Gr Grim Reaper X-Bow Razor tips or 100 Gr Grim Reaper Hybrids.
What length/weight/adjustments do you think I should ask the local shop to make the BEE'S if I use them for the Micro?
Thanks in advance
Micro 335 Nightmare: Morning Star
Elite Synergy; Krampus
Elite Synergy; Krampus
- mainstreet
- Posts: 57
- Joined: Mon Jul 08, 2013 10:42 pm
Re: 335 Nightmare "arra" configuration
Same insert cut them down 2 inches.