Just installed NAP foc on my micro. It sure does stick out far. But is this safe? Can I still use this setup?
FOC too long for Micro/Quill?
Moderator: Excalibur Marketing Dude
FOC too long for Micro/Quill?
-2019 Assassin 420
-2015 Micro 335 RTX
-2013 Vortex
-2015 Micro 335 RTX
-2013 Vortex
Re: FOC too long for Micro/Quill?
Sure you can and yes it is safe. Just be sure to check your arrow is still seated in the rail when you get to your stand as that length of arrow will surely catch on all kinds of vegetation. Also just to let you know, your micro may not have enough energy to open the big blades of the FOC. Mine didn't. Shot 2 deer with the micro and foc. Both double lung shots. One from 25 and the other from 35. Both arrows would not pass throught hide on the way out. Switched to a 125 gr. gravedigger COC head, shot a third deer and complete pass through. Also used the FOC from my 405 and 380 in the past with no problem passing though. Good luck!!
Re: FOC too long for Micro/Quill?
Yes just watch the front of bow that it doesnt catch anything!! I didn't like it that way so had my arras cut down to 15in and way better!
vixen 11
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen
Re: FOC too long for Micro/Quill?
I've also got a Vortex and it chrono'd the foc's at 309fps. Have shot 4 whitetail with it and it passed through and then some. Blades opened up just fine.Weiner wrote: Also just to let you know, your micro may not have enough energy to open the big blades of the FOC. Mine didn't. Shot 2 deer with the micro and foc. Both double lung shots. One from 25 and the other from 35. Both arrows would not pass throught hide on the way out.
Chrono'd my micro with the 170 grain field points and it was slinging them at 319fps! So, I'm pretty sure it will have NO problem opening up and passing through.
-2019 Assassin 420
-2015 Micro 335 RTX
-2013 Vortex
-2015 Micro 335 RTX
-2013 Vortex
Re: FOC too long for Micro/Quill?
Same, and no regrets on cutting them down!mr meat wrote:Yes just watch the front of bow that it doesnt catch anything!! I didn't like it that way so had my arras cut down to 15in and way better!
It’s not the way you rock, it’s the way that you roll!
Re: FOC too long for Micro/Quill?
Just giving you a heads up based on MY experience.
Hope your right!!I'm pretty sure it will have NO problem opening up and passing through.
Re: FOC too long for Micro/Quill?
One of the foc kills from my vortex...25 yard shot.
-2019 Assassin 420
-2015 Micro 335 RTX
-2013 Vortex
-2015 Micro 335 RTX
-2013 Vortex
Re: FOC too long for Micro/Quill?
That puts them down fast! WOW.
It’s not the way you rock, it’s the way that you roll!
Re: FOC too long for Micro/Quill?
Same issue with Spitfires. I'm going to cut my quills down
Micro 355 - (Mortal Cause II)
Stock String
Black Eagle Executioner Bolts
Tact Zone Scope
NAP SpitfiresXXX - 100 gn
ATN Shot Trak Video Camera
Stock String
Black Eagle Executioner Bolts
Tact Zone Scope
NAP SpitfiresXXX - 100 gn
ATN Shot Trak Video Camera