Hi All,
I put a trigger tech trigger into my 380 Matrix and since I've put it all back together
I have a slight squeak between the stock and the rail.
I've tried tightening the hex bolts a bit more, but I'm leary of tightening too much and stripping them.
Has anyone had a similar situation, if so did you fix it and how.
Thanks,
Jim
Squeaky Bow
Moderator: Excalibur Marketing Dude
Re: Squeaky Bow
Welcome, determine the location were the squeak originates, either under the forearm section or near the rear trigger section. Tighten that screw slowly one eighth of a turn at a time to remove the squeak.
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Re: Squeaky Bow
That sounds like a plan to me...
Matrix, 355. Hawke Xb-30 Pro. Ibex, Nikon Bolt. Strings By Boo, Nchunter, Zombies & Spynal Tapps From South Shore Archery,Now Built By My Son, N.A.P. Spitfire XXX and Magnus Black Hornets. (Fight Hard..Love Fast.. Die Young..)
-
GrassyKnoll
- Posts: 1421
- Joined: Sun Dec 12, 2010 9:13 am
- Location: Jackson, NJ
Re: Squeaky Bow
Welcome aboard..
Matrix 380 Xtra with Vortex Viper XBR, Trigger Tech,
Matrix 380 Xtra with Vortex Viper XBR, ^^^
Matrix 380 Blackout with Vortex Viper XBR,
Micro 335 Raid with HHAv Vortex Crossfire II Pro Grade trigger
Matrix 380 Xtra with Vortex Viper XBR, ^^^
Matrix 380 Blackout with Vortex Viper XBR,
Micro 335 Raid with HHAv Vortex Crossfire II Pro Grade trigger
-
Trigger1212
- Posts: 49
- Joined: Sun May 17, 2015 10:02 am
- Location: Bout 60 miles south of Chicago IL
Re: Squeaky Bow
A shot of silicone spray on the inside of your stock can go a very long way to address this. Key is to id where it is coming from. use some talc power or some machinist blue to find the guilty high spot and then knock it down. Just pulling it apart and putting it back together may also take care of it. Always try the easies (and cheapest) solution first!
Wade
Semper Fi!
Wade
Semper Fi!
Matrix 355 - "Spike"
20 " BE Executioners, 110 gr brass inserts, 2" blazers
NAP 100 gr Spitfires
Wyvern Flemish String
DM Bumpers
Semper Fi!
20 " BE Executioners, 110 gr brass inserts, 2" blazers
NAP 100 gr Spitfires
Wyvern Flemish String
DM Bumpers
Semper Fi!