skeltonized stock for matrix series

longbow joe · Post by **longbow joe** » Wed Aug 26, 2015 12:16 am

Wouldnt it be cool if excalibur would make a skeltonized micro stock at a fair price for the matrix series. ...id buy one. ...maby someone out there is listening ?

Solid19xX · Post by **Solid19xX** » Wed Aug 26, 2015 1:12 am

*deleted*

xcaliber · Post by **xcaliber** » Wed Aug 26, 2015 7:13 am

I would give it a looksie too!

racking up points · Post by **racking up points** » Wed Aug 26, 2015 7:34 am

Drill and tap your mainframe and get a Micro stock, and you'll have a skeletonized "Matrix". It would be a few inches shorter than the Matrix, but totally workable.

flightattendant100 · Post by **flightattendant100** » Wed Aug 26, 2015 7:52 am

Whittle on your existing stock. Don't be SKEERED! I whittled on one for Colton. They are pretty easy to work with.

bubba · Post by **bubba** » Wed Aug 26, 2015 9:41 am

Hmmm that would be interesting.......

Normous · Post by **Normous** » Wed Aug 26, 2015 10:02 am

flightattendant100 wrote:Whittle on your existing stock. Don't be SKEERED! I whittled on one for Colton. They are pretty easy to work with.

X2, there is plenty of material that can be removed in confidence.

flightattendant100 · Post by **flightattendant100** » Thu Aug 27, 2015 7:20 pm

Normous wrote:
flightattendant100 wrote:Whittle on your existing stock. Don't be SKEERED! I whittled on one for Colton. They are pretty easy to work with.
X2, there is plenty of material that can be removed in confidence.

On the older Vixen stock that I did for Colton, I was hesitant to cut too much out in my skeletonizing. I didn't want the stock to become weak or twist. The stock with the cutout has about zero give to it. You could cut quite a bit more out without compromising the stock. Have fun. The stocks are pretty soft and have a low melting point. If you use a dremel tool with a sanding drum to smooth it up after you cut it out, you better run it slow and easy or you will have a molten glob on the drum. Only warning... If it is on one of the camo stocks, where you cut it out will be white. You will have to come up with some way to color it . Just a thought

longbow joe · Post by **longbow joe** » Thu Aug 27, 2015 11:22 pm

Wow lots a ideas. Thanks. I have a micro this winter im gonna size the stock up on my matrix wen the seasons over

Excalibur Crossbow Forum

skeltonized stock for matrix series

skeltonized stock for matrix series

Re: skeltonized stock for matrix series

Re: skeltonized stock for matrix series

Re: skeltonized stock for matrix series

Re: skeltonized stock for matrix series

Re: skeltonized stock for matrix series

Re: skeltonized stock for matrix series

Re: skeltonized stock for matrix series

Re: skeltonized stock for matrix series