I can't reach the trigger

vixenmaster · Post by **vixenmaster** » Thu Nov 05, 2015 5:37 pm

Ok nutten has changed wid yer rail/Riser n string. So you fall short of reachin the trigger claws by 2". You do have yer cockin rope in the croove on stock n not on back rail ? So if'en the string is yer same one it should not be short ! Sumpin isn't fitten correctly !

vixenmaster · Post by **vixenmaster** » Thu Nov 05, 2015 5:40 pm

If'en all of that is proper then possibly the rope coker isn't gettin by the ADF n is bein short stopped

Boo · Post by **Boo** » Thu Nov 05, 2015 6:15 pm

Rufus wrote:Sorry , I think maybe you are putting your cocking rope on wrong

Agreed. Shorten your rope and see what happens.

mr meat · Post by **mr meat** » Thu Nov 05, 2015 6:59 pm

if you put a pencil across the rail and safety is off can you slide the pencil back and engage the trigger!!!

Fandex · Post by **Fandex** » Fri Nov 06, 2015 1:33 am

hi, is it possible that your string is goong over the antidryfire system ?
Or did u change the string wenn u had your new trigger ?

Fandex · Post by **Fandex** » Fri Nov 06, 2015 1:34 am

sorry, goong was going...

darwal44 · Post by **darwal44** » Fri Nov 06, 2015 8:29 am

Hi5, I didn´t remove the string, all I did was remove the trigger because it was sticky, then I sent the trigger to Excalibur, Excalibur repair it and sent it back to me, then I install it on the bow. I was able to cock it before all that, nothing has changed. Talking about the brace height, between the string and the bumpers there is one centimeter. I will post some pics when I can.

Sparkey · Post by **Sparkey** » Fri Nov 06, 2015 9:35 am

Actually if you can have someone take a video of you cocking the bow, I think we c o ups figure out what is wrong. Keep it 480x320 size and should be easy to upload to a timeshare site.

Fandex · Post by **Fandex** » Fri Nov 06, 2015 12:17 pm

have u the ADF installed ?

Fandex · Post by **Fandex** » Fri Nov 06, 2015 12:25 pm

is it possible that the ´string retainer' is not up ? ( see message before, can u put a pencil allong the whole rail ?)

Rufus · Post by **Rufus** » Fri Nov 06, 2015 1:56 pm

The ADF must be froze up for some reason nothing else could be stopping it. If its not your cocking rope.

CalhounWV · Post by **CalhounWV** » Fri Nov 06, 2015 2:01 pm

Also, check your arrow retainer spring.

bubba · Post by **bubba** » Fri Nov 06, 2015 3:02 pm

You guy's need to read the whole thread! He has gone over the adf and retainer two pages ago....

newbie · Post by **newbie** » Fri Nov 06, 2015 5:36 pm

bubba wrote:You guy's need to read the whole thread! He has gone over the adf and retainer two pages ago....

X2

ComfyBear · Post by **ComfyBear** » Fri Nov 06, 2015 5:50 pm

Why STILL no pics.....Seems like a whole lot of messing going on. Since it appears you have a useless bow just send it to me and I'll "dispose of it." and problem solved.

Excalibur Crossbow Forum

I can't reach the trigger

Re: I can't reach the trigger

Re: I can't reach the trigger

Re: I can't reach the trigger

Re: I can't reach the trigger

Re: I can't reach the trigger

Re: I can't reach the trigger

Re: I can't reach the trigger

Re: I can't reach the trigger

Re: I can't reach the trigger

Re: I can't reach the trigger

Re: I can't reach the trigger

Re: I can't reach the trigger

Re: I can't reach the trigger

Re: I can't reach the trigger

Re: I can't reach the trigger