100 or 125 grain broadhead on matrix 330

[hunter with MS]

I am wondering which wt. broadhead to use on the Matrix 330 100 or 125 . I use fixed blade

[drkeenan]

I've always used 100.

[sproulman]

not on crossbows but we always liked 100 gr fixed heads and 100/125 gr on mech...Most of my friends use SLICK TRICKS at archery club..

[longbow joe]

What kind of arras are you using?

[richard]

100s work fine for me. Go with what you like, the 330 shoots anything good.

[longbow joe]

[/URL] This is the foc i like to see at least 4 inches more than half. This helps bucking the wind also and it helps at the 40 yard plus ranges .this is a bea executioner with a 110 insert n a 100 head . (About 407 grain )Your 330 has enough grunt to sacrifice a little weight up front to help in accuracy i always go big . Just my 2 cents .

[hunter with MS]

Right now they will be on Gold tip laser 2 cut to 18 inch Diablo

[nchunterkw]

Right now they will be on Gold tip laser 2 cut to 18 inch Diablo

I'd go with 125s in GTs. If they have Al inserts you will want the weight to help FOC. If they have brass inserts, the GT brass insert is only 60 gr so again, you will want the weight. As for BH, I like the 125gr RamCat. Best flyer I have found. Slick Tricks are good too. If Al inserts you may even consider their 150gr head - Xbow Trick

[hunter with MS]

Thanks I have 125 Grain BH that is what I use on my Exomax . I use Muzzy crossbow trocar and muzzy crosskill both 125 The crosskills were before the trocar .

[longbow joe]

I agree with nc i asked last week if a 110 grain insert n a 125 grain head was overkill on a zombie most agreed not. These things fly like the devil and are extremely accurate ( this alluminum arrow guy might convert at least on one a my bows) i even put n extra grinded down insert on my alluminums plus a 125 head they fly great . I personally wouldnt go over 450 grains personally on a shaft. Plus dont forget the heavy shaft is easier on the old limbs too !