1st time fletching in 15 years
Moderator: Excalibur Marketing Dude
1st time fletching in 15 years
First I wanted to thank everyone on here as I've used the search feature often and you guys have been very helpful !
I haven't fletched an arrow in probably 15 years or so. Back then I was using an Ar EZ Fletch, Fletch Tite and I had a Mathews Q2. So using the EZ Fletch Bolt was no problem except on the first one - I forgot to ease up when closing the fingers.
Here's a picture and I'm calling them !
I haven't fletched an arrow in probably 15 years or so. Back then I was using an Ar EZ Fletch, Fletch Tite and I had a Mathews Q2. So using the EZ Fletch Bolt was no problem except on the first one - I forgot to ease up when closing the fingers.
Here's a picture and I'm calling them !
Last edited by OldWolf on Sat Jan 21, 2017 4:31 pm, edited 4 times in total.
Those who are brave .. are free.
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Re: 1st time fletching in 15 years
Those look great bud! Keep on making them buddy, and hunt hard!
It’s not the way you rock, it’s the way that you roll!
Re: 1st time fletching in 15 years
Thanks xcaliber and will do !!
LOL ArcheryAddict ! Hopefully he has a sense of humor .. I thought it was fitting with the inauguration tomorrow.
LOL ArcheryAddict ! Hopefully he has a sense of humor .. I thought it was fitting with the inauguration tomorrow.
Those who are brave .. are free.
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Re: 1st time fletching in 15 years
ArcheryAddict I agree with your entire post. Many years ago I became hands on in all my hobbies. The first time I had to have some arrows refletched I was told it would be a few days, they only had whatever kind/color vanes and the cost. I learned how to do it myself. The first time the serving went on the Q2 it was the same scenario. Wait a week for them to reserve it, wax and lubricate the wheel and cam. Then be charged high dollar. I saved and bought a bow press for my basement and learned. The same with my ammo. For the shotgun I reload pheasant shot, buckshot and slugs. I also reload for my 9 and 45.
Part of it is about saving but more is about placing the shot where I want it. If I do my part hopefully I won't be tracking all night and it will be a quick kill. I'm rambling. Thanks once again.
Part of it is about saving but more is about placing the shot where I want it. If I do my part hopefully I won't be tracking all night and it will be a quick kill. I'm rambling. Thanks once again.
Those who are brave .. are free.
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Re: 1st time fletching in 15 years
ArcheryAddict wrote:I wouldn't call them that if I was you! Trump patented that saying and there is nobody in the United States that has sued more people than he has. In six months to a year when he gets throwed out of office he will be wanting the money!
Dave
by the way Old Wolf nice job !
2010 equinox,
known as doe bow
vixenmaster custom string
swacker bhs, 2/1/4" cut 120 grn.
xx75 Easton 2219,s
firebolt arrows
S5 pads
if it ain't broke don't fix it
be safe in all you do
see ya in the woods
<-------<
known as doe bow
vixenmaster custom string
swacker bhs, 2/1/4" cut 120 grn.
xx75 Easton 2219,s
firebolt arrows
S5 pads
if it ain't broke don't fix it
be safe in all you do
see ya in the woods
<-------<
Re: 1st time fletching in 15 years
.....Oh really! Everybody has already decided on how his Presidency will turn out! As an ArcheryAddict be thankful Hillary isn't in the WH...otherwise you would need to have registration numbers on each arrow and report those numbers to the federal government....the animal activists would determine that hunting needs to cease....and on and on the liberal left snowflakes would keep pushing things....ArcheryAddict wrote:I wouldn't call them that if I was you! Trump patented that saying and there is nobody in the United States that has sued more people than he has. In six months to a year when he gets throwed out of office he will be wanting the money!
.....Boy it was refreshing to say Merry Christmas again to everyone I saw!
Anthony
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: 1st time fletching in 15 years
OldWolf wrote:First I wanted to thank everyone on here as I've used the search feature often and you guys have been very helpful !
I haven't fletched an arrow in probably 15 years or so. Back then I was using an Ar EZ Fletch, Fletch Tite and I had a Mathews Q2. So using the EZ Fletch Bolt was no problem except on the first one - I forgot to ease up when closing the fingers.
Here's a picture and I'm calling them "Making America Great Again" !
....great to see that OldWolf in you never forgot how to make arra's....Yep, a great name for your arra's....Keep up the good work in "Making America Great Again!"
Anthony
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: 1st time fletching in 15 years
I like 'em!!
Bulldog 400, Hawke XB30, JBK string, Dr S, TriggerT
405 Matrix, XBR, HAA, DM string, TT, ti64
405 Matrix Blackout, XBR, HAA, DM string, TT, ti64
405 Matrix, XBR, HAA, DM string, TT, ti64
405 Matrix Blackout, XBR, HAA, DM string, TT, ti64
Re: 1st time fletching in 15 years
Nice job on the arrows.
W.M.
W.M.
Re: 1st time fletching in 15 years
Thanks guys. I have to admit I was a bit forgetful so I used the search feature. Once I started prepping things it came back to me.
So I took the 4 recently fletched "Make America Great Again" Diablo arrows and weighed them. They were within a grain of each other. They varied, with the 150 grain field points, from 406.6 thru 407.4. I'll call it 407 grains. I then wanted to check the FOC. Using the online calculator and FT's (not BH's) it came out at 16.66%. I realize the FOC might change when I install BH's but it shouldn't be much (?). Any thoughts on the FOC being good, light, etc.? I'm shooting them from a Grizzly.
EDIT :
I just removed the nocks. I just installed the Lumenoks. So my total arrow weight is now 416 grains. My FOC is now 17.56%.
So I took the 4 recently fletched "Make America Great Again" Diablo arrows and weighed them. They were within a grain of each other. They varied, with the 150 grain field points, from 406.6 thru 407.4. I'll call it 407 grains. I then wanted to check the FOC. Using the online calculator and FT's (not BH's) it came out at 16.66%. I realize the FOC might change when I install BH's but it shouldn't be much (?). Any thoughts on the FOC being good, light, etc.? I'm shooting them from a Grizzly.
EDIT :
I just removed the nocks. I just installed the Lumenoks. So my total arrow weight is now 416 grains. My FOC is now 17.56%.
Those who are brave .. are free.
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Re: 1st time fletching in 15 years
I guess I cannot use the quote in jest. No matter what I do the picture will not come up now. All my other pictures work (?).
Those who are brave .. are free.
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Re: 1st time fletching in 15 years
I agree I thought that it was going down as well. I did everything the same as I did the first time. I do know all the numbers changed after installing the lighted nocks. The overall length changed. The length to the balancing point changed. The Lumenok added roughly 1/4" to the length.
I was using the calculator at archerycalculator.com. ??? I have not chrono'd the speed yet.
Update :
I just carefully rechecked each of the 4 arrows for FOC ... several times.
The FOC (using archery calculator) is 16.66%. I must have made a mistake in my measurements previously .. getting old. Thanks AA !
I was using the calculator at archerycalculator.com. ??? I have not chrono'd the speed yet.
Update :
I just carefully rechecked each of the 4 arrows for FOC ... several times.
The FOC (using archery calculator) is 16.66%. I must have made a mistake in my measurements previously .. getting old. Thanks AA !
Last edited by OldWolf on Sat Jan 21, 2017 3:54 pm, edited 1 time in total.
Those who are brave .. are free.
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Re: 1st time fletching in 15 years
I had another thought when measuring for the FOC calculator. I should have installed the Lumenoks prior to fletching. Now the fletching has a 1/4" difference from future refletching. When I do the rest of the arrows this week I will install the Lumenoks first so everything remains uniform.
Those who are brave .. are free.
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Re: 1st time fletching in 15 years
ArcheryAddict thanks for all the help. I was thinking I will fletch all with the Lumenoks that way any future refletching would be the same. It's tough for me to do anything right now as I have a tear in my rotator cuff and a bone spur there as well. Hopefully I can get some more arrows done in the next few days.
Here's a couple of pics :
Here's a couple of pics :
Those who are brave .. are free.
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
Grizzly
HHA Optimizer with Hawke Scope, Munch Mount, Quikee 3 quiver,
BowJax2 silencers, self made kydex cheek piece
18" Diablo Arrows w Blazer vanes, 150 gr Boltcutter BH's, Lumenoks
418 grains with 16.66% FOC
- racking up points
- Posts: 1608
- Joined: Mon Aug 12, 2013 7:41 pm
- Location: Windsor, ON
Re: 1st time fletching in 15 years
FWIW - I use Lumenocks but when I fletch my arrows each shaft gets the same regular plastic nock to keep the vane setback consistent from arrow to arrow. I see no change in POI when using weight matched plastic nocks or the longer but equal weight Lumenock.OldWolf wrote:ArcheryAddict thanks for all the help. I was thinking I will fletch all with the Lumenoks that way any future refletching would be the same. It's tough for me to do anything right now as I have a tear in my rotator cuff and a bone spur there as well. Hopefully I can get some more arrows done in the next few days.
Here's a couple of pics :
Leupold Optics
Boo Custom Strings
Black Eagle Arrows
Ti64.com Fastener Kits
Boo Custom Strings
Black Eagle Arrows
Ti64.com Fastener Kits