Polishing triggers
Moderator: Excalibur Marketing Dude
Polishing triggers
This new suppressor appears to have a trigger claw ber which is damaging the string serving I'm not wanting to start sending bits back to Canada but also don't want to start buying tools and stuff to do it my self .... any easy way of doing it ? Fine sand paper? Does the trigger claw have to come out ? Just looking for an easy fix tried to up load a couple of pictures but says they are to big from my phone
- BrotherRon
- Posts: 2178
- Joined: Thu Aug 28, 2014 2:47 am
- Location: North Central Wisconsin
- Contact:
Re: Polishing triggers
No, it doesn't have to come off.
Here is a link to important stuff on the site Boo has which explains how to sand the claw
http://boocustomstrings.com/importantstuff.html
Thanks Robertyb... I had a senior moment and forgot to add a link to the site.
Here is a link to important stuff on the site Boo has which explains how to sand the claw
http://boocustomstrings.com/importantstuff.html
Thanks Robertyb... I had a senior moment and forgot to add a link to the site.
Last edited by BrotherRon on Sun Jun 18, 2017 11:21 am, edited 3 times in total.
Matrix 310 ~ Hawke XB30 Pro SR ~ TT~Plano 36" All Weather Tactical Hard Case.
Danny Miller Top Mount Quiver.
Strings by Boo ~ nchunterkw ~ 8ptbuk
Jeremiah 29:13
Danny Miller Top Mount Quiver.
Strings by Boo ~ nchunterkw ~ 8ptbuk
Jeremiah 29:13
Re: Polishing triggers
Go slow and do not use a power tool like a dremel. I've seen a couple of trigger units FUBAR'D when abrasive strips were not used. Patience will get you where you want and power tools will easily get you really sad After doing a very large number of triggers, I still use abrasive strips.
Some people just like stepping on rakes
-
- Posts: 4260
- Joined: Sat Jun 06, 2015 9:55 pm
- Location: south eastern pa (bucks county)
Re: Polishing triggers
Boo has a cool website that explains this ...hes just being modest.look it up it has helped me with this problem on my micro ....Ohhhh visions of shady and the famous trigger job post.lololol then in the end he made that bad a $$ metal matrix bow . Hey what about that bow?
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
-
- Posts: 4807
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: Polishing triggers
Boo wouldn't pull his own string ( pun intended), but he is the guru on most of this stuff. As LBJ said he has some info on his website that will help you. Give it a look then pm him a pat on the back.longbow joe wrote:Boo has a cool website that explains this ...hes just being modest.look it up it has helped me with this problem on my micro ....Ohhhh visions of shady and the famous trigger job post.lololol then in the end he made that bad a $$ metal matrix bow . Hey what about that bow?
Re: Polishing triggers
Here is the link. Look about 85% down on the page to find it.
http://www.boocustomstrings.com/importantstuff.html
http://www.boocustomstrings.com/importantstuff.html
Wildlife Population Control Specialist
Re: Polishing triggers
LOL just pay Boo.
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
-
- Posts: 91
- Joined: Tue Jul 24, 2012 4:14 pm
- Location: Northern New Jersey
Re: Polishing triggers
Thanks very much Boo! I just ordered the 3 grades of abrasive strips listed on your website.
Bob
Bob
THE IMMENSE IMPORTANCE OF A PINT OF ALE TO A COMMON PERSON SHOULD NEVER BE OVERLOOKED!
-
- Posts: 4260
- Joined: Sat Jun 06, 2015 9:55 pm
- Location: south eastern pa (bucks county)
Re: Polishing triggers
Regulardless of polishing dont forgot them micros are just rough on strings with the short limbs a string seems to get half the life of a normal matrix 330. An angel majesty serving helps a lot also.
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Re: Polishing triggers
Thanks for the replys ,going to have a think about it ...really pleased with the bow otherwise. Cheers
Re: Polishing triggers
Iv managed to polish the trigger so sorted the serving wear hopefully .