I seem to be too picky with limb deformations or at least too nervous to have a limb bolted onto my crossbow with any form of deformity. Last time it was a large 3" deformation running on top of the limb where it bolts onto the crossbow. Now it is a deformation or splinter from drilling the hole in the limb.
Here is some pictures of what I am talking about. You be the judge.
[https://app.photobucket.com/u/okie143/a/e8c1cb3d-d63f-4ac8-bee8-e60bda9437d0/p/4290ce5d-0642-4bc9-8f11-918452db09ae?mode=zoom][https://app.photobucket.com/u/okie143/a/e8c1cb3d-d63f-4ac8-bee8-e60bda9437d0/p/1ed1c31d-7a02-4bc8-8546-2c8e0c8e4c94?mode=zoom]
Being to Nervous or to picky with limb deformations
Moderator: Excalibur Marketing Dude
Being to Nervous or to picky with limb deformations
Excalibur Axiom 305 SMF with ADF
2017 Excalibur Matrix 380 Tact-Zone Lite-Stuff Crossbow Package
Diablo Excalibur bolts with Excalibur Boltcutter and Trailblazer Broadheads
Lumenok Lighted Nocks
Retired/100% Disabled Veteran
2017 Excalibur Matrix 380 Tact-Zone Lite-Stuff Crossbow Package
Diablo Excalibur bolts with Excalibur Boltcutter and Trailblazer Broadheads
Lumenok Lighted Nocks
Retired/100% Disabled Veteran
-
- Posts: 625
- Joined: Thu Feb 21, 2019 3:23 pm
Re: Being to Nervous or to picky with limb deformations
Save your pictures for future reference, then bolt em on and send arrows down range. Those are definite flaws, but they are under the compressed bolted and washer area and I can't imagine that being a reliability issue. Someone will correct me if I'm wrong though.
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
Re: Being to Nervous or to picky with limb deformations
This is the 3rd set of limbs I have received from Excalibur with my originals splintering, 1 replacement set has major deformity over 3" long, now this set has a deformity where the strength of the limb bolts onto the crossbow.
I am sure it would shoot for awhile but don't want to be in woods and here a major crack noise. Just picky that way I guess.
I am sure it would shoot for awhile but don't want to be in woods and here a major crack noise. Just picky that way I guess.
Excalibur Axiom 305 SMF with ADF
2017 Excalibur Matrix 380 Tact-Zone Lite-Stuff Crossbow Package
Diablo Excalibur bolts with Excalibur Boltcutter and Trailblazer Broadheads
Lumenok Lighted Nocks
Retired/100% Disabled Veteran
2017 Excalibur Matrix 380 Tact-Zone Lite-Stuff Crossbow Package
Diablo Excalibur bolts with Excalibur Boltcutter and Trailblazer Broadheads
Lumenok Lighted Nocks
Retired/100% Disabled Veteran
Re: Being to Nervous or to picky with limb deformations
My 400 Suppressor limbs came similar to that on the underside that made me curious. I ended up talking to the limb maker and engineer and was told that an impression is made there for stress relief. I’m unsure that yours are the same but either way, it won’t effect the limbs. If is a defect, any stress stops at the limb bolt hole.
Some people just like stepping on rakes
Re: Being to Nervous or to picky with limb deformations
Thanks for all the replies. I am just a perfectionist I guess. However it want stop me from taking it to the woods this weekend.
Merry Christmas everyone and a blessed new year.
Merry Christmas everyone and a blessed new year.
Excalibur Axiom 305 SMF with ADF
2017 Excalibur Matrix 380 Tact-Zone Lite-Stuff Crossbow Package
Diablo Excalibur bolts with Excalibur Boltcutter and Trailblazer Broadheads
Lumenok Lighted Nocks
Retired/100% Disabled Veteran
2017 Excalibur Matrix 380 Tact-Zone Lite-Stuff Crossbow Package
Diablo Excalibur bolts with Excalibur Boltcutter and Trailblazer Broadheads
Lumenok Lighted Nocks
Retired/100% Disabled Veteran