Time to retire the 405 - Getting too old. New horse in the stable
Moderator: Excalibur Marketing Dude
Time to retire the 405 - Getting too old. New horse in the stable
Evening everyone,
I went for a hunt yesterday and at about 7 am I had a nice Tom come in. Ranged him wrong and watched my Lumi-Nok sale clean over his back . As I watched him hustle into the cover I heard another gobble behind me. Cocking my 405 has been a challenge after shoulder surgery last year but I told myself I can do it. Well I struggled and struggled to cock my bow but just couldn't do it before another Tom came past my blind. Man getting old sucks.
After a little research I jumped in my truck and headed to Easthill Outdoors. Long story short after trying a few Excals I settled on a 400 TD;
I know I could have but a crank on the 405 but my wife didn't know that .....
The absolute bonus and to my surprize Excal has a promotion on which is a BOGO so I left the store with 2 Excals and I have a bow for my granddaughter;
I'm not getting paid nor do I have friends at Easthill but I cant say enough about their customer service and/or their prices.
The 400 TD is zeroed in and I'm headed out in the morning hoping for a rematch~!
Take care and stay safe.
Cheers
Chester
I went for a hunt yesterday and at about 7 am I had a nice Tom come in. Ranged him wrong and watched my Lumi-Nok sale clean over his back . As I watched him hustle into the cover I heard another gobble behind me. Cocking my 405 has been a challenge after shoulder surgery last year but I told myself I can do it. Well I struggled and struggled to cock my bow but just couldn't do it before another Tom came past my blind. Man getting old sucks.
After a little research I jumped in my truck and headed to Easthill Outdoors. Long story short after trying a few Excals I settled on a 400 TD;
I know I could have but a crank on the 405 but my wife didn't know that .....
The absolute bonus and to my surprize Excal has a promotion on which is a BOGO so I left the store with 2 Excals and I have a bow for my granddaughter;
I'm not getting paid nor do I have friends at Easthill but I cant say enough about their customer service and/or their prices.
The 400 TD is zeroed in and I'm headed out in the morning hoping for a rematch~!
Take care and stay safe.
Cheers
Chester
Wildlife Management & Reduction Specialist
Re: Time to retire the 405 - Getting too old. New horse in the stable
Nice!
It’s not the way you rock, it’s the way that you roll!
- Carnivorous
- Posts: 3779
- Joined: Sun Dec 25, 2005 12:56 pm
- Location: Belleriver Ontario
Re: Time to retire the 405 - Getting too old. New horse in the stable
Good choice right there!!
I agree Easthill are good people...
I agree Easthill are good people...
A touch of frost has heightened your awareness and your heart steadily beats in anticipation. Your senses are suddenly alert to the movement on the forest floor and you realize that the moment of truth is at hand.
Re: Time to retire the 405 - Getting too old. New horse in the stable
Turn that 405 into a 315 and be all set.
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: Time to retire the 405 - Getting too old. New horse in the stable
405 down to a 400. Bows are basically same speed are they not?
-
- Posts: 624
- Joined: Thu Feb 21, 2019 3:23 pm
Re: Time to retire the 405 - Getting too old. New horse in the stable
Nice choice on the 400TD and bonus Mag Air!
Also agree with Janesy, cut your 405 rail a little shorter and you'll have 3 usable bows. One easy way to go about it is by cutting it the length so that your current rear riser bolt hole becomes your new front riser bolt hole.
Also agree with Janesy, cut your 405 rail a little shorter and you'll have 3 usable bows. One easy way to go about it is by cutting it the length so that your current rear riser bolt hole becomes your new front riser bolt hole.
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
-
- Posts: 624
- Joined: Thu Feb 21, 2019 3:23 pm
Re: Time to retire the 405 - Getting too old. New horse in the stable
His new Assassin 400TD has built in crank. Shoots nearly the same, but a lot easier reloading in the blind for him now. Well earned upgrade I'd say.
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
Re: Time to retire the 405 - Getting too old. New horse in the stable
And half the sizewheelsquad wrote: ↑Tue May 09, 2023 9:47 pmHis new Assassin 400TD has built in crank. Shoots nearly the same, but a lot easier reloading in the blind for him now. Well earned upgrade I'd say.
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: Time to retire the 405 - Getting too old. New horse in the stable
Congrats on the new pair! Ones never enough
vixen 11
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen
Re: Time to retire the 405 - Getting too old. New horse in the stable
The 405 will become my son's bow. He has been using my old Exomax and Vixen for many years. During my hiatus he hunted with the 405. Anytime we practice he always gravitates to the 405. He is 6'2 and should have no problem for many years to come.wheelsquad wrote: ↑Tue May 09, 2023 9:39 pmNice choice on the 400TD and bonus Mag Air!
Also agree with Janesy, cut your 405 rail a little shorter and you'll have 3 usable bows. One easy way to go about it is by cutting it the length so that your current rear riser bolt hole becomes your new front riser bolt hole.
Cheers
Chester
Wildlife Management & Reduction Specialist
-
- Posts: 624
- Joined: Thu Feb 21, 2019 3:23 pm
Re: Time to retire the 405 - Getting too old. New horse in the stable
That's better yet!Sandman wrote: ↑Wed May 10, 2023 6:55 amThe 405 will become my son's bow. He has been using my old Exomax and Vixen for many years. During my hiatus he hunted with the 405. Anytime we practice he always gravitates to the 405. He is 6'2 and should have no problem for many years to come.wheelsquad wrote: ↑Tue May 09, 2023 9:39 pmNice choice on the 400TD and bonus Mag Air!
Also agree with Janesy, cut your 405 rail a little shorter and you'll have 3 usable bows. One easy way to go about it is by cutting it the length so that your current rear riser bolt hole becomes your new front riser bolt hole.
Cheers
Chester
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
Re: Time to retire the 405 - Getting too old. New horse in the stable
Just a suggestion. Toss those string stars. One will come off soon enough and with only one on, it will cause a change in POI. Also, the limb silencers are way to close to the limb tips. If you're going to keep them on, move them much closer to the riser where there is little to no movement. They do work a bit in lowering noise but they work even better at eating arrow speeds as the approach the limb tips. The further out from the riser, the more they'll slide on the limbs.
Some people just like stepping on rakes
Re: Time to retire the 405 - Getting too old. New horse in the stable
Will do thanks Boo~!Boo wrote: ↑Thu May 11, 2023 10:28 amJust a suggestion. Toss those string stars. One will come off soon enough and with only one on, it will cause a change in POI. Also, the limb silencers are way to close to the limb tips. If you're going to keep them on, move them much closer to the riser where there is little to no movement. They do work a bit in lowering noise but they work even better at eating arrow speeds as the approach the limb tips. The further out from the riser, the more they'll slide on the limbs.
Cheers
Chester
Wildlife Management & Reduction Specialist
Re: Time to retire the 405 - Getting too old. New horse in the stable
Nice assassin. I’m waiting for mine to arrive.