How do I get at the claw?

GaryL · Post by **GaryL** » Sun Oct 02, 2005 2:06 am

TYE emery cloth is like a sandpaper, only instead of paper backing it is a cloth like backing. You can get it at a hardware store or auto parts store. Comes in different grades same as sandpaper....

TYE · Post by **TYE** » Sun Oct 02, 2005 2:09 am

GaryL wrote:TYE emery cloth is like a sandpaper, only instead of paper backing it is a cloth like backing. You can get it at a hardware store or auto parts store. Comes in different grades same as sandpaper....

Okay so get a fine grade Emery cloth?

Boltshooter.... lol Gary is gonna be pulling his hair out by the end of this thread if we keep this up...

GaryL · Post by **GaryL** » Sun Oct 02, 2005 2:12 am

TYE wrote:
GaryL wrote:TYE emery cloth is like a sandpaper, only instead of paper backing it is a cloth like backing. You can get it at a hardware store or auto parts store. Comes in different grades same as sandpaper....
Okay so get a fine grade Emery cloth?

Boltshooter.... lol Gary is gonna be pulling his hair out by the end of this thread if we keep this up...

Yep ya got it....

GREYWOLF maybe able to explain how you can take out the claws....Bill T. fer sure if'n thats what ya wana doooo's.....

Boltshooter · Post by **Boltshooter** » Sun Oct 02, 2005 2:13 am

What would we do without Gary? It must be pretty late where you guys are.

GaryL · Post by **GaryL** » Sun Oct 02, 2005 2:14 am

Boltshooter wrote: What would we do without Gary? It must be pretty late where you guys are.

12min. after 2:00AM....

NewGuy · Post by **NewGuy** » Sun Oct 02, 2005 2:38 am

emery cloth is sandpaper just use fine stuff(meaning not coarse

)

TYE · Post by **TYE** » Sun Oct 02, 2005 3:03 am

3:00am here now...

Golden Eagle · Post by **Golden Eagle** » Sun Oct 02, 2005 6:46 am

TYE wrote:I am having the same problem with my Pheonix.

Have noticed that with mine too. On the right side when holding the bow.
Will take a look at the claws today when the Sun comes up.

TYE · Post by **TYE** » Sun Oct 02, 2005 11:29 am

Will emery cloth not make the claws rough and make them wear the string/serving even more?

Digger · Post by **Digger** » Sun Oct 02, 2005 12:19 pm

You get very fine emery cloth Tye. I does smooth it out the higher the number grit, the smoother it gets it.
Its like when you do body work on your car, you put the filler in the dent then rub with 120 grain sand paper to get big chunks down then 240 grain paper, the 400 grain to smooth it right down so it feels a babies bottom.
You can get emery cloth finer than that, go to Canadian Tire store for it.

Sliver · Post by **Sliver** » Sun Oct 02, 2005 3:10 pm

TYE wrote:I still don't know what this emery stuff is....

Very fine sand paper, usually black in colour TYE

peter p · Post by **peter p** » Sun Oct 02, 2005 3:41 pm

I think it's also called wet sand paper. It's black and used for wet sanding. it can also be used dry. It usually comes in 400, 600, 1000 grade. I would use the 400 grade.

TYE · Post by **TYE** » Sun Oct 02, 2005 3:47 pm

My dads gonna get some for me from work tonight.

TYE · Post by **TYE** » Thu Oct 13, 2005 12:34 pm

Talked to a shop and they're gonna fix the problem for free.