MultiPin for excalibur

Jim C · Post by **Jim C** » Sun Mar 26, 2006 9:44 pm

A good friend emailed me asking if I could recommend a multi pin site for another guy's excalibur. I never use anything but a scope (save for a sure loc on my point blanc target bows). any suggestions?

Mark · Post by **Mark** » Mon Mar 27, 2006 7:02 am

Jim , look for the trophyridge alphacross , nice little sight.

Mark

TYE · Post by **TYE** » Mon Mar 27, 2006 8:32 am

Do the Trophy Ridge sights fit on the Excalibur's ? I read on the box they say only Horton's and Tenpoints.

Jim C · Post by **Jim C** » Mon Mar 27, 2006 9:14 am

TYE wrote:Do the Trophy Ridge sights fit on the Excalibur's ? I read on the box they say only Horton's and Tenpoints.

That is true from what I remember=we were a TR dealer, they gave me one of those to try and I gave it to a guy with a horton because I couldn't get it to work on a cast riser vixen

NightTrain · Post by **NightTrain** » Mon Mar 27, 2006 9:46 am

The trophy rigde's need to be modded inorder to fit.

TYE · Post by **TYE** » Mon Mar 27, 2006 9:59 am

NightTrain wrote:The trophy rigde's need to be modded inorder to fit.

How?

NightTrain · Post by **NightTrain** » Mon Mar 27, 2006 12:44 pm

TYE wrote:
NightTrain wrote:The trophy rigde's need to be modded inorder to fit.
How?

I dont have the answer

I would contact Trophie Ridge and see what they say. To issueshere; limited space and bracket modification.

Please post their responce as I would be interested to know the solution.

TYE · Post by **TYE** » Mon Mar 27, 2006 1:08 pm

Sent them an email.

TYE · Post by **TYE** » Mon Mar 27, 2006 1:22 pm

Correct. It comes with bracket attachments to install either way.

Brent
Trophy Ridge - Tech Support
www.TrophyRidge.com
406-388-7781

-----Original Message-----
From: Tyler [mailto:[email protected]]
Sent: Monday, March 27, 2006 12:55 PM
To: [email protected]
Subject: RE:

Oh so the site will attach vertically instead of from the side like a Horton

or Tenpoint?

>From: "Trophy Ridge - Tech Support" <[email protected]>
>To: "'Tyler'" <[email protected]>
>Subject: RE:
>Date: Mon, 27 Mar 2006 12:51:03 -0700
>
>Yeah that helps out a lot. The Alpha sight will connect just like you have
>your sight attached, using the same holes.

>
>Brent
>Trophy Ridge - Tech Support
>www.TrophyRidge.com
>406-388-7781
>
>
>
>-----Original Message-----
>From: Tyler [mailto:[email protected]]
>Sent: Monday, March 27, 2006 12:18 PM
>To: [email protected]
>Subject: RE:
>
>Here are some pictures taken of my Excalibur Phoenix crossbow. Maybe they
>will help...
>
>
>
> >From: "Trophy Ridge - Tech Support" <[email protected]>
> >To: "'Tyler'" <[email protected]>
> >Subject: RE:
> >Date: Mon, 27 Mar 2006 11:44:04 -0700
> >
> >Yeah it most of the photos that I can find do not even show one with
> >anything other then a scope mounted. This one has a system like the Alpha
> >sight http://www.excaliburcrossbow.com/exocet200.htm but it is still hard
> >to
> >see exactly how it mounts up.
> >Do you have the crossbow already?
> >
> >Brent
> >Trophy Ridge - Tech Support
> >www.TrophyRidge.com
> >406-388-7781
> >
> >
> >
> >-----Original Message-----
> >From: Tyler [mailto:[email protected]]
> >Sent: Monday, March 27, 2006 11:17 AM
> >To: [email protected]
> >Subject: RE:
> >
> >By that to you mean the holes on the side of the rail? Excalibur
>crossbows
> >don't have those.
> >
> >
> >
> >
> > >From: "Trophy Ridge - Tech Support" <[email protected]>
> > >To: "'Tyler'" <[email protected]>
> > >Subject: RE:
> > >Date: Mon, 27 Mar 2006 11:13:09 -0700
> > >
> > >Greetings,
> > >As long as the crossbow has ammo standard mounting holes the Alfa sight
> > >will
> > >fit. From what I can tell the Excalibur looks to be using the standards
> >but
> > >you might want to call them and verify. Hope this helps.
> > >
> > >Brent
> > >Trophy Ridge - Tech Support
> > >www.TrophyRidge.com
> > >406-388-7781
> > >
> > >
> > >
> > >-----Original Message-----
> > >From: Tyler [mailto:[email protected]]
> > >Sent: Monday, March 27, 2006 11:04 AM
> > >To: [email protected]
> > >Subject:
> > >
> > >Hello Trophy Ridge,
> > >
> > >Is there a way to fit the Alpha Cross crossbow sight on an Excalibur
> > >Crossbow? Or is there a way things could be modified to fit the sight
>to
> >an
> > >Excalibur Crossbow?
> > >
> > >Thanks,
> > >Tyler

QBoy · Post by **QBoy** » Tue Mar 28, 2006 6:42 am

Yeah, you are right man!

TYE · Post by **TYE** » Tue Mar 28, 2006 7:49 am

QBoy wrote:Yeah, you are right man!

What?