bow quiver by groundpounder

foreman · Post by **foreman** » Tue Dec 05, 2006 8:07 am

these are awsome. anyone with a excalibur should have one. excalibur shouid sell them as an accessory.

foreman · Post by **foreman** » Tue Dec 05, 2006 8:39 am

foreman wrote:these are awsome. anyone with a excalibur should have one. excalibur shouid sell them as an accessory.

foreman · Post by **foreman** » Tue Dec 05, 2006 8:44 am

i meant to say quiver mount

Pydpiper · Post by **Pydpiper** » Tue Dec 05, 2006 8:57 am

Do you have a link?

foreman · Post by **foreman** » Tue Dec 05, 2006 9:40 am

i have very little knowledge about computers. groundpounder invented a overbow quiver mount which is awsome with the new style quiver by excalibur which really hold your arrows. they dont come out period. i hope this helps.

GaryL · Post by **GaryL** » Tue Dec 05, 2006 10:21 am

Got mine yesterday and they are the best for a xbow quiver mount for Excals. Reckon one might make them fit others.

Heres the link/post:

http://www.excaliburcrossbow.com/phpBB2 ... hp?t=16125

Pydpiper · Post by **Pydpiper** » Tue Dec 05, 2006 11:03 am

I get it now, Groundpounder is a member who made the item..
Thanks for the link, that is an impressive set up.

Brampton Mike · Post by **Brampton Mike** » Fri Dec 08, 2006 4:03 am

Got mine yesterday and it looks awesome......it will be mounted on my Exocet tomorrow!!!!!!!!!! Thanks Groundpounder!

Brampton Mike

Brampton Mike · Post by **Brampton Mike** » Sun Dec 10, 2006 4:50 am

Mine does not fit!!!!!!!!!!!!

Brampton Mike

GaryL · Post by **GaryL** » Sun Dec 10, 2006 8:24 am

Brampton Mike wrote: Mine does not fit!!!!!!!!!!!! Brampton Mike

Which riser ya got Brampton Mike

Mine fit perfect however not so sure on a cast riser.

Brampton Mike · Post by **Brampton Mike** » Sun Dec 10, 2006 8:57 am

Don't know which riser i have all i know is thereare no holes for the mount to fit into!

Brampton Mike

GaryL · Post by **GaryL** » Sun Dec 10, 2006 9:17 am

Brampton Mike wrote:Don't know which riser i have all i know is ther eare no holes for the mount to fit into! Brampton Mike

Sorry man, but ya got a cast riser and their be no holes as you stated to fit the mount into.

Groundpounder reckon this is notice that your super mount is not for use with cast risers, only machined risers.

GREY OWL · Post by **GREY OWL** » Sun Dec 10, 2006 9:50 am

Brampton Mike wrote: Mine does not fit!!!!!!!!!!!! Brampton Mike

Mike, it wouldn't be very hard to drill and tap some holes for your quiver. If you stil don't want it, I'll buy it from you.

Grey Owl

groundpounder · Post by **groundpounder** » Sun Dec 10, 2006 10:35 am

Let me know what you want to do(return?) I posted that you need to have the two holes 4.1" apart in the riser for this to bolt right on. I did not know which all xbows had these holes and which did not. I hate for anyone to drill more holes in their xbow. PM me on what you want me to do.

groundpounder · Post by **groundpounder** » Sun Dec 10, 2006 11:19 am

I do hate for anyone to have to drill in their xbow. But if you choose to all you would have to do is lay the top plate of the quiver mount on your riser just above the front peep sights mount and transfer your mounting holes(4.1 inches apart). Then drill with a 5/16" drill. No tapping required.

Excalibur Crossbow Forum

bow quiver by groundpounder

bow quiver by groundpounder

Re: bow quiver mount by groundpounder

quiver mount

no i dont have a link.