AS PROMISED NEW PICS OF MY EXOMAX WITH KOLORFUSION PARTS
Moderator: Excalibur Marketing Dude
-
- Posts: 61
- Joined: Mon Apr 30, 2007 11:25 am
- Location: United Kingdom
AS PROMISED NEW PICS OF MY EXOMAX WITH KOLORFUSION PARTS
Hi All,
Here are some photos of my Exomax which i have just had customised with the Kolorfusion Realtree design to various parts to match the stock & limbs. Again i would like to sincerely Thank Groudpounder for beadblasting my parts prior to sending them to Kolorfusion, "Thanks Todd" Hope you like your mount"? let me know what you think when it arrives back with you.
Hope you all like my set-up ?, I know a three quiver set-up won't appeal to alot of you guys, but it suits my needs perfectly because i do all my hunting from 40-70 yards at ground level in a fixed position low level hide in bad weather or in a prone position wearing a guille suit in better weather. I shoot multiple targets then go and collect my winnings, so having all the arrows i need attached to my exomax saves me from carrying anything else with me except for my trusty Tom Brown Tracker knife "I never leave home without it".
The next thing i want to do is have the rail sides finished in Kolorfusion Realtree & replace all the steel bolts to titanium to eliminate them from rusting. Fit a Simms Navcom recoil butt pad along with a wolfszeit scope mount & Meostar R1 3-12X56 RD scope for greater distance and follow in the footsteps of Matthais in his quest to find the perfect long distance hunting arrow. The Ventores shooters are having excellent results and it makes for some very interesting reading.
Hope you all like the pics and i will be more than happy to answer any questions
Happy Hunting to you all "God Bless"
Jason ( "Take only memories, leave only footprints". )
http://s205.photobucket.com/albums/bb8/ ... deview.jpg
http://s205.photobucket.com/albums/bb8/ ... front3.jpg
http://s205.photobucket.com/albums/bb8/ ... axtop2.jpg
http://s205.photobucket.com/albums/bb8/ ... axtop3.jpg
http://s205.photobucket.com/albums/bb8/ ... perail.jpg
http://s205.photobucket.com/albums/bb8/ ... ouping.jpg
http://s205.photobucket.com/albums/bb8/ ... axtop4.jpg
Here are some photos of my Exomax which i have just had customised with the Kolorfusion Realtree design to various parts to match the stock & limbs. Again i would like to sincerely Thank Groudpounder for beadblasting my parts prior to sending them to Kolorfusion, "Thanks Todd" Hope you like your mount"? let me know what you think when it arrives back with you.
Hope you all like my set-up ?, I know a three quiver set-up won't appeal to alot of you guys, but it suits my needs perfectly because i do all my hunting from 40-70 yards at ground level in a fixed position low level hide in bad weather or in a prone position wearing a guille suit in better weather. I shoot multiple targets then go and collect my winnings, so having all the arrows i need attached to my exomax saves me from carrying anything else with me except for my trusty Tom Brown Tracker knife "I never leave home without it".
The next thing i want to do is have the rail sides finished in Kolorfusion Realtree & replace all the steel bolts to titanium to eliminate them from rusting. Fit a Simms Navcom recoil butt pad along with a wolfszeit scope mount & Meostar R1 3-12X56 RD scope for greater distance and follow in the footsteps of Matthais in his quest to find the perfect long distance hunting arrow. The Ventores shooters are having excellent results and it makes for some very interesting reading.
Hope you all like the pics and i will be more than happy to answer any questions
Happy Hunting to you all "God Bless"
Jason ( "Take only memories, leave only footprints". )
http://s205.photobucket.com/albums/bb8/ ... deview.jpg
http://s205.photobucket.com/albums/bb8/ ... front3.jpg
http://s205.photobucket.com/albums/bb8/ ... axtop2.jpg
http://s205.photobucket.com/albums/bb8/ ... axtop3.jpg
http://s205.photobucket.com/albums/bb8/ ... perail.jpg
http://s205.photobucket.com/albums/bb8/ ... ouping.jpg
http://s205.photobucket.com/albums/bb8/ ... axtop4.jpg
Last edited by STANDS ALONE on Fri Jun 29, 2007 3:21 pm, edited 1 time in total.
Exomax x 2
Custom Ground Pounder mounts x 2
Custom Boo Strings
Wolfszeit Adjustable Scope Mount
6-24X50 Mildot Scope
STS
Matthias Custom Inserts with Nap Nitron 125grn
1.5 Mini Blazer Vanes 3 degree r/h offset
20" Easton 2219 XX78 super slam
Custom Ground Pounder mounts x 2
Custom Boo Strings
Wolfszeit Adjustable Scope Mount
6-24X50 Mildot Scope
STS
Matthias Custom Inserts with Nap Nitron 125grn
1.5 Mini Blazer Vanes 3 degree r/h offset
20" Easton 2219 XX78 super slam
-
- Posts: 61
- Joined: Mon Apr 30, 2007 11:25 am
- Location: United Kingdom
IV'E DOUBLE CHECKS THAT THE URL LINKS ARE WORKING, SEEMS FINE, TRY AGAIN AND LET ME KNOW.
MIGHT BE HAVING PROBLEMS IF MORE THAN 1 PERSON IS VIEWING MY PHOTO ALBUM AT ONCE, DON'T REALLY NOW THIS IS THE FIRST TIME I HAVE USED PHOTO BUCKET.
IF YOU STILL HAVE PROBLEMS LET ME KNOW AND I WILL TRY AND POST THE PICS INTO THE FORUM. THE PICS ARE JUST BIGGER IN MY ALBUM FOR CLEARER VIEW.
THANKS
Jason
MIGHT BE HAVING PROBLEMS IF MORE THAN 1 PERSON IS VIEWING MY PHOTO ALBUM AT ONCE, DON'T REALLY NOW THIS IS THE FIRST TIME I HAVE USED PHOTO BUCKET.
IF YOU STILL HAVE PROBLEMS LET ME KNOW AND I WILL TRY AND POST THE PICS INTO THE FORUM. THE PICS ARE JUST BIGGER IN MY ALBUM FOR CLEARER VIEW.
THANKS
Jason
Exomax x 2
Custom Ground Pounder mounts x 2
Custom Boo Strings
Wolfszeit Adjustable Scope Mount
6-24X50 Mildot Scope
STS
Matthias Custom Inserts with Nap Nitron 125grn
1.5 Mini Blazer Vanes 3 degree r/h offset
20" Easton 2219 XX78 super slam
Custom Ground Pounder mounts x 2
Custom Boo Strings
Wolfszeit Adjustable Scope Mount
6-24X50 Mildot Scope
STS
Matthias Custom Inserts with Nap Nitron 125grn
1.5 Mini Blazer Vanes 3 degree r/h offset
20" Easton 2219 XX78 super slam
-
- Posts: 216
- Joined: Fri Mar 10, 2006 1:12 pm
- Location: ROMA-Italia-Europe
- Contact:
Very nice Jason! Compliments!
How did you do this work? How did you paint these parts?
Regards
Matthias
How did you do this work? How did you paint these parts?
Regards
Matthias
Hunting&Crossbow- www.cacciaebalestra.altervista.org -The first Italian crossbowyers site
Exomax&Exocet200
Meopta Artemis 2000 3-12x50
Wolfszeit adjustable scope mount
Absorber V-BAR
Ultra-sensitive trigger
2219xx78-620grs-21% FOC
Nap Nitron
Exomax&Exocet200
Meopta Artemis 2000 3-12x50
Wolfszeit adjustable scope mount
Absorber V-BAR
Ultra-sensitive trigger
2219xx78-620grs-21% FOC
Nap Nitron
-
- Posts: 6989
- Joined: Thu Oct 19, 2006 12:16 pm
-
- Posts: 61
- Joined: Mon Apr 30, 2007 11:25 am
- Location: United Kingdom
THANKS MATTHAIS
Hi Matthais
First i contacted Excalibur to see if the parts were available to buy from them in the Realtree design and they said that as of yet they were not available, so i contacted Kolorfusion directly who did the design on the stock and limbs and within a day they replied saying that they would be able to apply it for me if i sent the parts, so that's what i did and they were back with me in two weeks. They are very nice people and it cost me $250 to have all 11 parts done which is the companies minimum order price because they usually only do large orders, but i think it was worth every cent.
Thanks for the compliment Matthais
Jason
First i contacted Excalibur to see if the parts were available to buy from them in the Realtree design and they said that as of yet they were not available, so i contacted Kolorfusion directly who did the design on the stock and limbs and within a day they replied saying that they would be able to apply it for me if i sent the parts, so that's what i did and they were back with me in two weeks. They are very nice people and it cost me $250 to have all 11 parts done which is the companies minimum order price because they usually only do large orders, but i think it was worth every cent.
Thanks for the compliment Matthais
Jason
Exomax x 2
Custom Ground Pounder mounts x 2
Custom Boo Strings
Wolfszeit Adjustable Scope Mount
6-24X50 Mildot Scope
STS
Matthias Custom Inserts with Nap Nitron 125grn
1.5 Mini Blazer Vanes 3 degree r/h offset
20" Easton 2219 XX78 super slam
Custom Ground Pounder mounts x 2
Custom Boo Strings
Wolfszeit Adjustable Scope Mount
6-24X50 Mildot Scope
STS
Matthias Custom Inserts with Nap Nitron 125grn
1.5 Mini Blazer Vanes 3 degree r/h offset
20" Easton 2219 XX78 super slam
-
- Posts: 61
- Joined: Mon Apr 30, 2007 11:25 am
- Location: United Kingdom
Thanks Sumner4991, & yes your right i will need to tred carefullysumner4991 wrote:If you lay it down in the woods . . .well, you may never find it again.
That's very nice!
Exomax x 2
Custom Ground Pounder mounts x 2
Custom Boo Strings
Wolfszeit Adjustable Scope Mount
6-24X50 Mildot Scope
STS
Matthias Custom Inserts with Nap Nitron 125grn
1.5 Mini Blazer Vanes 3 degree r/h offset
20" Easton 2219 XX78 super slam
Custom Ground Pounder mounts x 2
Custom Boo Strings
Wolfszeit Adjustable Scope Mount
6-24X50 Mildot Scope
STS
Matthias Custom Inserts with Nap Nitron 125grn
1.5 Mini Blazer Vanes 3 degree r/h offset
20" Easton 2219 XX78 super slam
-
- Posts: 61
- Joined: Mon Apr 30, 2007 11:25 am
- Location: United Kingdom
Thanks BushdogBUSHDOG wrote:it worked this time, very nice ,hows the weight with the quivers ? watch out Todd people are going to want your mounts in camo now
I find the weight fine with three quivers, i do shoot most of the time in prone position which is why i fitted the UTG stud mounted bipod, but shooting in other positions is still very comfortable and no loss in accuracy.
Regards
Jason
Exomax x 2
Custom Ground Pounder mounts x 2
Custom Boo Strings
Wolfszeit Adjustable Scope Mount
6-24X50 Mildot Scope
STS
Matthias Custom Inserts with Nap Nitron 125grn
1.5 Mini Blazer Vanes 3 degree r/h offset
20" Easton 2219 XX78 super slam
Custom Ground Pounder mounts x 2
Custom Boo Strings
Wolfszeit Adjustable Scope Mount
6-24X50 Mildot Scope
STS
Matthias Custom Inserts with Nap Nitron 125grn
1.5 Mini Blazer Vanes 3 degree r/h offset
20" Easton 2219 XX78 super slam
-
- Posts: 392
- Joined: Sat Jan 06, 2007 8:58 am
- Location: Brampton, ON
parts
Very nice work done. My compliments to you.
I've always wanted the rails done in Camo or kolorfusion to match all my Excaliburs. I never wanted to paint or tape them either. If you could get the side and bottom of rails done in kolorfusion and the top of the rails in teflon that would be the Ultimate bow Ever!
Very Nice
John
I've always wanted the rails done in Camo or kolorfusion to match all my Excaliburs. I never wanted to paint or tape them either. If you could get the side and bottom of rails done in kolorfusion and the top of the rails in teflon that would be the Ultimate bow Ever!
Very Nice
John
Phoenix - 375 gr. BEE's (babyneilsons)
Micro 315 - 410 gr. Zombies/Lumenoks
Micro 355. - Punisher-Zombies/Lumenoks
Arrowmaker - Retired
[email protected]
Micro 315 - 410 gr. Zombies/Lumenoks
Micro 355. - Punisher-Zombies/Lumenoks
Arrowmaker - Retired
[email protected]
-
- Posts: 1280
- Joined: Thu Oct 12, 2006 3:15 pm
- Location: Monroe, Georgia
I have received my groundpounder mount back from Jason and I must say I wish I could afford to do it to all of them. It really is a professional job and looks great! You don't see or feel any seams in the camo or anything. Thanks Jason and your xbow looks great too all customized! I told you that you would receive some feedback with this one!
Why ride when you can walk!