nock problem

BUSHDOG · Post by **BUSHDOG** » Sun Sep 23, 2007 11:13 am

guys help me out .First I love my excocet the accurracy blows me away. I was sighting in using wasps and muzzys .i have a morrells yellow jacket target at 30 yards im burying the bolts to the fletchings the problem is ive pulled out 4 nocks using the puller .can you recommend any particular glue . i have a bottle of gorrilla glue would it be strong enough .thanks steve

frydaddy · Post by **frydaddy** » Sun Sep 23, 2007 1:52 pm

Gorrilla is good stuff. You might try two ton epoxey (15 min.) and make sure you clean the nock end good before reglueing. Hope this will help. Frydaddy

vixenmaster · Post by **vixenmaster** » Sun Sep 23, 2007 2:08 pm

Dan miller has a set of pliers specially built for pulling all arrows. Very reasonable last a life time. phone#740-483-2312 in Ohio.

BUSHDOG · Post by **BUSHDOG** » Sun Sep 23, 2007 2:25 pm

thanks guys ps i am using the excal puller

vixenmaster · Post by **vixenmaster** » Sun Sep 23, 2007 3:45 pm

Yup , threads into the rear and pulls the rear noks out! OK thats fine. Like you said use Gorilla glue or that 2 ton epoxy!

BUSHDOG · Post by **BUSHDOG** » Sun Sep 23, 2007 6:50 pm

lol so i gather the pliers work differently

vixenmaster · Post by **vixenmaster** » Sun Sep 23, 2007 7:58 pm

Yes, they have rubber on each side of small dia.steel pipe about 2" long. Pipe has been cut in two and its been welded to the pliers. Just open put around arrow close to where its in target turn clockwise a little and pull backwards. Best $12 awshucks ever spent. We used his at the last 3-D shoot pulled over 100 arrows didn't ruin any. Carbons or alum. I will be ordering mine for xmas.

awshucks · Post by **awshucks** » Sun Sep 23, 2007 8:44 pm

well, can't get pic to post, here's the photobucket bs if anyone can straighten it out. Hate that place!!

IMG]http://i61.photobucket.com/albums/h74/a ... rrpull.jpg[/IMG]

huntin1 · Post by **huntin1** » Wed Sep 26, 2007 3:47 pm

Here you go.

You were just missing one of these, [ in front of the first IMG.

huntin1

BUSHDOG · Post by **BUSHDOG** » Wed Sep 26, 2007 4:23 pm

thanks huntin ill look into those

GaryL · Post by **GaryL** » Wed Sep 26, 2007 4:35 pm

awshucks wrote:well, can't get pic to post, here's the photobucket bs if anyone can straighten it out. Hate that place!!

IMG]http://i61.photobucket.com/albums/h74/a ... rrpull.jpg[/IMG]

awshucks just upload your pic to PB, under your pic high-light the third box under your pic....copy and paste in your post. It truly is easy ....

Grizzly Adam · Post by **Grizzly Adam** » Wed Sep 26, 2007 4:46 pm

Defintely get the plier-pullers, and forget that silly screw-in nock remover! Those things are sold by insert manufacturing companies (or glue companies)!

Dan will send you the plier-pullers pronto. I got mine two days later!

They work like a charm. No stuck bolt is a match for them. Just position them, grasp firmly, give a little twist, and out they come!

You WILL NOT be sorry!

Excalibur Crossbow Forum

nock problem

nock problem

Gluing nocks