STS arrow speed loss

Crossbow Hunting

Moderator: Excalibur Marketing Dude

User avatar
Boo
Posts: 14375
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada
Contact:

STS arrow speed loss

Post by Boo »

There ain't any!!! LOL! I tested any and all of my strings I had around with and without and there is no speed loss. Apparently the arrow leaves the string by the time the string reaches the brace height. Makes sense because logically the string has to decelerate after the brace height.
Just a FYI.
Some people just like stepping on rakes
Grizzly Adam
Posts: 5701
Joined: Fri Aug 04, 2006 8:36 pm
Location: Decatur County, Indiana

Post by Grizzly Adam »

Good to know, Boo!

What do you find about noise and vibration reduction? :D
Grizz
User avatar
wabi
Posts: 13443
Joined: Wed Oct 09, 2002 9:21 pm
Location: Ohio

Post by wabi »

I found no changes in POI with the STS installed, so I was guessing the velocity was very close with/without.
Good to have confirmation!

BTW - I would guess with a vert bow and snap-on type nock it might actually increase arrow speed slightly since the nock would detach from the string at the end of the power stroke and not be decellerated by the string slowing down after the end of the powerstroke (overtravel). Just a guess, though.
wabi
xbowking
Posts: 515
Joined: Sun Feb 20, 2005 11:07 am
Location: Tory Hill Haliburton ONTARIO

Post by xbowking »

I think i will put an STS on my crossbow, soon as i get a few extra bucks, how much are they around $40-$50 ?
"DON'T BE SCARED JUST GET A BOO"
PREMIUM CROSSBOW STRINGS
Bohning Blazer Vanes Rock
User avatar
Boo
Posts: 14375
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada
Contact:

Post by Boo »

wabi wrote:I found no changes in POI with the STS installed, so I was guessing the velocity was very close with/without.
Good to have confirmation!

BTW - I would guess with a vert bow and snap-on type nock it might actually increase arrow speed slightly since the nock would detach from the string at the end of the power stroke and not be decellerated by the string slowing down after the end of the powerstroke (overtravel). Just a guess, though.
That seems logical to me Wabi. Another great thing about any STS is the consistency of the release. Clean and at the same time no mater what the temperature, humidity, string speed etc
Some people just like stepping on rakes
globemountain
Posts: 97
Joined: Sat Mar 26, 2005 7:38 pm
Location: Northeastern Kentucky

Post by globemountain »

Are there any negative issues with the STS and post shot limb vibrations or anything.......
TYE
Posts: 5136
Joined: Thu Mar 31, 2005 2:11 pm
Location: Peterborough, Ontario, Canada
Contact:

Post by TYE »

Think I'm gonna eventually get one for my compound.
User avatar
wabi
Posts: 13443
Joined: Wed Oct 09, 2002 9:21 pm
Location: Ohio

Post by wabi »

globemountain wrote:Are there any negative issues with the STS and post shot limb vibrations or anything.......
As far as I can tell they reduce limb vibration since they stop the string at the most relaxed point of limb travel. I believe that is the reason they reduce noise/vibration (recoil) so effectively. The string does not travel past the brace height position, so they eliminate that oscillation.
wabi
Sand rock
Posts: 5
Joined: Mon Mar 10, 2008 7:00 pm
Location: Kentucky

Post by Sand rock »

I put a sts on a Equinox after about 50 shot the impact of the arrow at 50 yards was the same and it was a little quiter . I have ordered a 48 strand Boo string hope it makes things real quite. Idont think you will find a more helpful person than Don.
User avatar
Boo
Posts: 14375
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada
Contact:

Post by Boo »

Thanks Sand rock!
I believe you are right Wabi. The way I understand it is that the string oscillation is energy which is moving the string back and forth and is converted into mechanical energy into the air. Moving air is noise. The STS absorbs that energy which means that the energy goes into the stoppers rather than the air. All this means is less noise and protection in the case of a dry-fire.
Some people just like stepping on rakes
User avatar
Big John
Posts: 3119
Joined: Wed May 11, 2005 9:29 pm
Location: Niagara Region

reply

Post by Big John »

Protection in case of dry fire is worth the price alone.
Helping quiet and lessen vibration are added bonus's. :wink: :)
Phoenix - 375 gr. BEE's (babyneilsons)
Micro 315 - 410 gr. Zombies/Lumenoks
Micro 355. - Punisher-Zombies/Lumenoks

Arrowmaker - Retired
[email protected]
Fishn-Hunter
Posts: 375
Joined: Thu Nov 01, 2007 8:33 pm
Location: Ont.

Post by Fishn-Hunter »

How are the sts mounted? I have an older exocet 175 like around 1995 or 96 would I need to drill and tap or do they mount on existing hole's?
Fishn-Hunter
Family, Friends, Huntn & Fishn
Northern
Posts: 50
Joined: Mon Mar 24, 2008 7:11 pm

Post by Northern »

What is a STS?
Darrin
Esox
Posts: 321
Joined: Wed May 31, 2006 12:41 am
Location: New Jersey

Post by Esox »

FYI- For those that want more information here is STS Excalibur String Suppressor.....


http://www.bowhunterssuperstore.com/exc ... -7003.html
User avatar
Boo
Posts: 14375
Joined: Thu Dec 29, 2005 11:04 pm
Location: Newtonville, Ontario, Canada
Contact:

Post by Boo »

Northern, an STS is a string stopping system.
Ian, you can see where the hole is in the rise if you check the link.
http://www.excaliburcrossbow.com/phpBB2 ... hlight=sts
I looked at my old carved tipped Exocet and you can do it but you would have to drill through a webbing that I am sure shouldn't be drilled through.
Image
Image
I mocked the STS on my old beast so you can see what I mean Ian.
I left some room between the rail and the STS for the cocking hooks.[/img]
Some people just like stepping on rakes
Post Reply