Arrows sticking in foam targets?
Moderator: Excalibur Marketing Dude
Arrows sticking in foam targets?
Try spraying them with Jig-a-Loo, a dry lube from WalMart. Works absolutely great.
-
- Posts: 3084
- Joined: Sat Aug 04, 2007 1:57 am
- Location: McEwen Tennessee
Bought a can today. Then I got to thinking (dangerous thing I know). This vortex sinks the arrow up to the fletching now. So by spraying the arrow it might go in past the fletching. Or are you talking about 3-D targets?
2008 Excalibur Vortex, Lumizone, STS
"The only thing necessary for the triumph of evil is for good men to do nothing."
"The only thing necessary for the triumph of evil is for good men to do nothing."
1)It's in the automotive dept, with gas additives, etc.
2) No it's not a foam 3 D target, it's a rubber layered generic block.
3) I'm shooting a Vortex too. The arrows generally stop short of the vanes when shot at 35 yards (that's the placement of this particular target). If the hit is a 'soft spot' and goes too deep I just pull them out the back. 2'' Blazers are no worse for wear.
BTW I made my own targets for closer shots. I use a large nylon mesh feed sack and jam it full of returned plastic bags I pick up at several stores. In the areas I expect arrows to hit, I fill plastic bags with old clothes. Pack around them nice and tight using more scrap plastic. I use a hog nose ring pliers and medium hog nose rings to close the top. Make super targets, arrows come out using two fingers. This way I have targets out at 4 distances throughout the back yard for practicing.. I save my Block for broadheads. But since I switched to Slick Tricks don't need to practice with bheads much as they fly like the field points.
2) No it's not a foam 3 D target, it's a rubber layered generic block.
3) I'm shooting a Vortex too. The arrows generally stop short of the vanes when shot at 35 yards (that's the placement of this particular target). If the hit is a 'soft spot' and goes too deep I just pull them out the back. 2'' Blazers are no worse for wear.
BTW I made my own targets for closer shots. I use a large nylon mesh feed sack and jam it full of returned plastic bags I pick up at several stores. In the areas I expect arrows to hit, I fill plastic bags with old clothes. Pack around them nice and tight using more scrap plastic. I use a hog nose ring pliers and medium hog nose rings to close the top. Make super targets, arrows come out using two fingers. This way I have targets out at 4 distances throughout the back yard for practicing.. I save my Block for broadheads. But since I switched to Slick Tricks don't need to practice with bheads much as they fly like the field points.
-
- Posts: 6148
- Joined: Thu Nov 30, 2006 4:56 pm
- Location: Woodstock, Brantford'ish, ON
- Contact:
A feed sack stuffed with other feed sacks works great too, get them in there tight.8up wrote:Thanks for the info. I have about 100 of the feed sacks.
If you are not willing to learn, nobody can help you, if you are willing, nobody can stop you.
A bowhunter with a passion for shooting firearms.
WMU 91
Boo string
A bowhunter with a passion for shooting firearms.
WMU 91
Boo string