lumni zone ?

GA.crossbowhunt · Post by **GA.crossbowhunt** » Tue Dec 02, 2008 1:09 pm

ok guys and gals. were should i set the dial for the lumi scope for the phoenix? going by the bow shop in morning to site it all in and out in the woods this weekend.

Stash · Post by **Stash** » Tue Dec 02, 2008 4:05 pm

Start with the setting at about 290 if you're using carbons with 100 grains up front.

GA.crossbowhunt · Post by **GA.crossbowhunt** » Tue Dec 02, 2008 4:13 pm

i knew i should have included what bolt i was using. those will be goldtip lazer II with brass insters and a 100gr slick trick broadhead

Normous · Post by **Normous** » Tue Dec 02, 2008 4:25 pm

(+/-) 280-290 is a good start with that string and arrow.

Pydpiper · Post by **Pydpiper** » Tue Dec 02, 2008 4:36 pm

Don't count on the speed ring numbers, mine is on the "2" of 325 and my bow shoots 300 all day long.
Here, try this..
I have pictures of each step if you need them.

http://www.excaliburcrossbow.com/phpBB2 ... black+line