tracer for xbow

saxman · Post by **saxman** » Sat Jan 31, 2009 1:48 pm

Batteries are on the way.
Thanks again

saxman · Post by **saxman** » Wed Feb 04, 2009 7:49 pm

The batteries got here today and they are an exact fit and work great.
I took 3 shots with each arrow and they light up the low light like the 4th of july.

This is a consumer victory for me.
the big bad archery company tried to shut me out and deny me but it didn't work.

I got 10 batteries and I have 3 nocks,I'm good for awhile.

Here is the link
http://search.digikey.com/scripts/DkSea ... me=P140-ND

michiganman · Post by **michiganman** » Wed Feb 04, 2009 9:42 pm

what fits in the excalibur firebolts????

shafferm · Post by **shafferm** » Thu Feb 05, 2009 10:59 am

The 3 Volt pin batteries come in two different sizes that should work, the BR425 and BR435. The BR425's are rated at 25mAh and weigh about 8.5 grains. The BR435's are rated at 50mAh and weigh about 13.1 grains. The battery cases are basically the same with the larger being 10mm longer. If you are looking to shave a bit of weight in the rear you can go with the BR425's at the expense of shorter run times, but if you are looking to maintain the quoted run time from the factory you will need to use the BR435 batteries.

Here is the link to the data sheet for both batteries.
http://www.panasonic.com/industrial/bat ... _BR435.pdf

Here is another supplier for both battery sizes

http://www.powerstream.com/cr435.htm

-M

michiganman · Post by **michiganman** » Thu Feb 05, 2009 11:03 am

will they fit the excalibur firebolt.

Excalibur Crossbow Forum

tracer for xbow

tracer 1/2 moon

lighted nocks

firebolts