Hello all. I am new to crossbows & forum. After reading all the info from yall I bought the Ibex with A box full of accs. Need size of allen for scopemounts screws
Thanks
Newbee needs helb
Moderator: Excalibur Marketing Dude
-
Pydpiper
- Posts: 6148
- Joined: Thu Nov 30, 2006 4:56 pm
- Location: Woodstock, Brantford'ish, ON
- Contact:
Nice bow! Great choice for a first run.
Your bow should have had the tools with it.
Recently bstout made a thread about the allen wrench sizes, it may be just what you are after..
*EDIT*
Here is your answer:
http://www.excaliburcrossbow.com/phpBB2 ... hp?t=26544
And here is the contents of Bobs post:
I've printed this chart and have it attached to the outside of my archery tackle box with a piece of clear packing tape.
Top screws on Excalibur scope rings----2.5mm
Scope mount screws-----------------------3/32"
Trigger assembly screws to rail----------9/64"
Trigger to trigger assembly---------------7/64"
Stock to rail screws-------------------------1/8"
Limb and riser screws (big'uns)----------3/16"
Recoil plates to riser------------------------1/8"
Stirrup to rail---------------------------------5/32"
If you're tired of second rate allen wrenches rounding off or breaking, get yourself a set of these (35194).
Your bow should have had the tools with it.
Recently bstout made a thread about the allen wrench sizes, it may be just what you are after..
*EDIT*
Here is your answer:
http://www.excaliburcrossbow.com/phpBB2 ... hp?t=26544
And here is the contents of Bobs post:
I've printed this chart and have it attached to the outside of my archery tackle box with a piece of clear packing tape.
Top screws on Excalibur scope rings----2.5mm
Scope mount screws-----------------------3/32"
Trigger assembly screws to rail----------9/64"
Trigger to trigger assembly---------------7/64"
Stock to rail screws-------------------------1/8"
Limb and riser screws (big'uns)----------3/16"
Recoil plates to riser------------------------1/8"
Stirrup to rail---------------------------------5/32"
If you're tired of second rate allen wrenches rounding off or breaking, get yourself a set of these (35194).
Last edited by Pydpiper on Wed May 06, 2009 6:24 pm, edited 1 time in total.
If you are not willing to learn, nobody can help you, if you are willing, nobody can stop you.
A bowhunter with a passion for shooting firearms.
WMU 91
Boo string
A bowhunter with a passion for shooting firearms.
WMU 91
Boo string
welcome to the forum! Thanks to 'bstout', here ya go. I'd be suspect of scope cap screw sizes, think they can vary some, but all the rest are right on.
Top screws on Excalibur scope rings----2.5mm
Scope mount screws-----------------------3/32"
Trigger assembly screws to rail----------9/64"
Trigger to trigger assembly---------------7/64"
Stock to rail screws-------------------------1/8"
Limb and riser screws (big'uns)----------3/16"
Recoil plates to riser------------------------1/8"
Stirrup to rail---------------------------------5/32"
Top screws on Excalibur scope rings----2.5mm
Scope mount screws-----------------------3/32"
Trigger assembly screws to rail----------9/64"
Trigger to trigger assembly---------------7/64"
Stock to rail screws-------------------------1/8"
Limb and riser screws (big'uns)----------3/16"
Recoil plates to riser------------------------1/8"
Stirrup to rail---------------------------------5/32"
"Eze 18:21"
-
one shot scott
- Posts: 7023
- Joined: Wed Sep 10, 2008 10:20 pm
- Location: Ontariooh ohh
-
Grizzly Adam
- Posts: 5701
- Joined: Fri Aug 04, 2006 8:36 pm
- Location: Decatur County, Indiana
-
Real McCoy
- Posts: 195
- Joined: Thu Dec 18, 2008 11:25 am
- Location: NW Louisiana