Replaced STS rods with NGSS adjustable rods.

Crossbow Hunting

Moderator: Excalibur Marketing Dude

Post Reply
josh1963
Posts: 49
Joined: Sun Jul 08, 2007 6:04 pm
Location: Ontario

Replaced STS rods with NGSS adjustable rods.

Post by josh1963 »

I replaced STS rods with NGSS adjustable rods.They fit great,much better then STS rods.NEW GUY A+++ TO DEAL WITH. I recommend this to anyone thinking about cutting down your STS rods.
2008 Excalibur Equinox
AP scope package
Firebolts, NGSS,Ground pounder,s-coil stabilizer,Extender and cheekpiece
bojangles
Posts: 368
Joined: Wed Aug 06, 2008 12:13 am
Location: Northern Ohio

Post by bojangles »

Thanks for the info
User avatar
one shot scott
Posts: 7021
Joined: Wed Sep 10, 2008 10:20 pm
Location: Ontariooh ohh

Post by one shot scott »

Has anyone not had to cut the rods on the sts? I know I am going to try out new guys string stoppers. They seem much better designed.
*thumbhole vixen*original relayer*y25relayer*matrix380-
VixChix
Posts: 7299
Joined: Mon Nov 13, 2006 2:00 pm
Location: Southern Ontario

Post by VixChix »

Tim/TPM just picked up a set of NGSS today and is VERY happy with the fit and design!

Unfortunately, at this point they don't fit my Vixen with the older riser. Guess I need a new bow? :lol:
________________
Sent from a mobile device - So spelling and grammar may be questionable!
---
"Team DryFire"
Vixen, Micro 315, HHA Optimizer, Boo & VixenMaster strings, Munch Mounts, Dr. Stirrup accessories.
User avatar
one shot scott
Posts: 7021
Joined: Wed Sep 10, 2008 10:20 pm
Location: Ontariooh ohh

Post by one shot scott »

[quote="VixChix
Unfortunately, at this point they don't fit my Vixen with the older riser. Guess I need a new bow? :lol:[/quote]

Is this the reason why some of us have to cut down the rods? They(the sts) was originally designed for the older riser? I had a newer exomax, than an equinox, now a y25 and all take the "shortened" sts rods.

And vixchix, any reason is a good reason to buy a new bow :wink:
*thumbhole vixen*original relayer*y25relayer*matrix380-
mikej
Posts: 5688
Joined: Sat Sep 15, 2007 1:38 pm
Location: ontario

Post by mikej »

one shot scott wrote:[quote="VixChix
Unfortunately, at this point they don't fit my Vixen with the older riser. Guess I need a new bow? :lol:
Is this the reason why some of us have to cut down the rods? They(the sts) was originally designed for the older riser? I had a newer exomax, than an equinox, now a y25 and all take the "shortened" sts rods.

And vixchix, any reason is a good reason to buy a new bow :wink:[/quote]

the older risers didn't have the mounting holes needed for the sts or ngss or groundpounder
If guns cause crime, all of mine are defective
agingcrossbower
Posts: 4788
Joined: Tue May 19, 2009 8:21 am
Location: chilton Wi.

Post by agingcrossbower »

Thanks for the heads up. My ngss rods are on the way. Newguy great to buy from. Mike 8)
VixChix
Posts: 7299
Joined: Mon Nov 13, 2006 2:00 pm
Location: Southern Ontario

Post by VixChix »

(The GroundPounder Mount fits my Vixen. For the NGSS the problem is that my Vixen's riser has a curved edge instead of an angled edge.)
________________
Sent from a mobile device - So spelling and grammar may be questionable!
---
"Team DryFire"
Vixen, Micro 315, HHA Optimizer, Boo & VixenMaster strings, Munch Mounts, Dr. Stirrup accessories.
skamaniac
Posts: 91
Joined: Sun Jun 07, 2009 7:27 am
Location: Michigan

Post by skamaniac »

Curves are good :wink: I have the STS on my Phoenix and looking at it i would bet it could be modified to fit. I haven't been here only a day or two but have found out there are a lot of ingenious folks hanging out here.

Mike
'Those who hammer their guns into plows will plow for those who did not.'
Post Reply