Was thinking, The more offset you put on a your fletching, the more it would stabilze a fixed blade broadhead, right?
Is there a maximun offset due to the groove in the rail?
Thanks
Dogger
Fletching offset
Moderator: Excalibur Marketing Dude
-
- Posts: 82
- Joined: Sun Sep 28, 2003 1:50 pm
- Location: Listowel, Ont
Fletching offset
You gotta squeeze the trigger Harley. Don't yank it, It's not your d#$!.
-
- Posts: 6989
- Joined: Thu Oct 19, 2006 12:16 pm
It depends on the length of your vane.
Just remember, the more twist, the more noise your arrow will make and the more speed you will lose down range.
Just remember, the more twist, the more noise your arrow will make and the more speed you will lose down range.
I'd rather wear out than rust out.
Perception trumps intention.
2006 Exomax w/Agingcrossbower Custom Stock
20" Easton Powerbolts w/125gr Trophy Ridge Stricknines & 2"Blazers
Boo Custom Strings
2006 Vixen
Perception trumps intention.
2006 Exomax w/Agingcrossbower Custom Stock
20" Easton Powerbolts w/125gr Trophy Ridge Stricknines & 2"Blazers
Boo Custom Strings
2006 Vixen
-
- Posts: 6148
- Joined: Thu Nov 30, 2006 4:56 pm
- Location: Woodstock, Brantford'ish, ON
- Contact:
The faster an arrow is turning the more stable it will become, provided it is balanced in the first place.
The larger the span on the broad head the more important it becomes to stabilize the flight through spin and balance.
Spin a top on the table and see how long it remains straight, then try the same top without spinning it.
The larger the span on the broad head the more important it becomes to stabilize the flight through spin and balance.
Spin a top on the table and see how long it remains straight, then try the same top without spinning it.
If you are not willing to learn, nobody can help you, if you are willing, nobody can stop you.
A bowhunter with a passion for shooting firearms.
WMU 91
Boo string
A bowhunter with a passion for shooting firearms.
WMU 91
Boo string
-
- Posts: 82
- Joined: Sun Sep 28, 2003 1:50 pm
- Location: Listowel, Ont
Not the best picture, but this bolt has quite a bit of offset. Don't know how much. As much as my bohning jig will alow and still have good vane contact.
These fly amazing, just made two this morn to test with feild points and my fixed blade broadheads. 2 inch groups with BH's at 30 yrds.(I know only two shot groups) not same POI as FP's but I just adusted for that.
The amount of offset seems to work ok so far. I am happy.
Thanks
Dogger
These fly amazing, just made two this morn to test with feild points and my fixed blade broadheads. 2 inch groups with BH's at 30 yrds.(I know only two shot groups) not same POI as FP's but I just adusted for that.
The amount of offset seems to work ok so far. I am happy.
Thanks
Dogger
You gotta squeeze the trigger Harley. Don't yank it, It's not your d#$!.
-
- Posts: 13618
- Joined: Wed Sep 14, 2005 3:51 pm
- Location: Western Ky