Screw size
Moderator: Excalibur Marketing Dude
Screw size
Does anyone know what size/thread screws are used in the Excal weaver rail or trigger box ?
-
Pydpiper
- Posts: 6148
- Joined: Thu Nov 30, 2006 4:56 pm
- Location: Woodstock, Brantford'ish, ON
- Contact:
Re: Screw size
A while back there was a very comprehensive bolt size list posted, I think it was done by Doemaster.
If you are not willing to learn, nobody can help you, if you are willing, nobody can stop you.
A bowhunter with a passion for shooting firearms.
WMU 91
Boo string
A bowhunter with a passion for shooting firearms.
WMU 91
Boo string
Re: Screw size
mate call john he'll send you some free if you have lost it but l have some spare as wellDash wrote:Does anyone know what size/thread screws are used in the Excal weaver rail or trigger box ?
JUST FIGHTING TO SURVIVE..
-
vixenmaster
- Posts: 13618
- Joined: Wed Sep 14, 2005 3:51 pm
- Location: Western Ky
Re: Screw size
Hi
They are #8-32 by 5/16" long. Be careful because if you use too long of a screw they will jam up your catch and shut the trigger unit down.
They are #8-32 by 5/16" long. Be careful because if you use too long of a screw they will jam up your catch and shut the trigger unit down.
Re: Screw size
Thanks for the reply guys. I was out of town for a few days and just saw it. Just got a couple of semi rounded hex heads and want to change them before I round the hex out and have them stuck.
Thanks for the tip Bill. I'll get the exact size.
Thanks for the tip Bill. I'll get the exact size.