Greetings,and a Question?

Time-N-Flight · Post by **Time-N-Flight** » Thu Jul 28, 2011 9:19 am

Im coming into the Crossbow fold,after more than 40 years shooting a compound.Getting up in age,my shoulders are giving me problems.I have a Equinox Lite Stuff package,due to be delivered TODAY! (NICE) Iv been making Arrows and String's for the Vertical Bow ,for quite a few years,but I have a question on the Bolt Insert on the Nock end.Iv read in a Post,that it is not a good idea,to use a Point Insert,on the Nock End!

I just completed making up a dozen Easton Power Bolts,and was forced to use the Point insert,for the Nock insert.....because I can not find anything especially made for the Power Bolt Nock End.Could one of you fine people, enlighten me,as to what Im looking for,and where to go to get a visual peek at the Critter?Many Thanks!,and what a Great Board to read through!
Thanks Again!

vixenmaster · Post by **vixenmaster** » Thu Jul 28, 2011 9:36 am

I haven't looked fer a nokend to that arrow shaft. Nothing wrong with using front inserts. Just cut it down to 5/16" or 3/8" & bevel the the edge so it won't abraid yer string serving

muskyman454 · Post by **muskyman454** » Thu Jul 28, 2011 12:03 pm

welcome to the site and you will love your equinox plenty of power and a tack driver.

roly · Post by **roly** » Thu Jul 28, 2011 12:15 pm

Welcome to the forum

Lots of good ppl here to help you

flightattendant100 · Post by **flightattendant100** » Thu Jul 28, 2011 6:06 pm

I think Wyvern Creations has those nock type inserts for Easton shafts.

Time-N-Flight · Post by **Time-N-Flight** » Thu Jul 28, 2011 6:38 pm

Thank you very much!That looks like the one im after.

strum · Post by **strum** » Thu Jul 28, 2011 6:57 pm

welcome to the forum

georgiaboy · Post by **georgiaboy** » Thu Jul 28, 2011 7:40 pm

Welcome to the forum!!!!

Congrats on your nox...aka "the beast"

Time-N-Flight · Post by **Time-N-Flight** » Thu Jul 28, 2011 8:49 pm

Thanks Guy's! This is an awesome site.Iv been reading everything I can get my Mouse on,most of the day! So much knowledge here,it's a virtual Treasure Trove.

Limbs and Sticks · Post by **Limbs and Sticks** » Thu Jul 28, 2011 10:02 pm

Welcome aboard, have fun, shoot safe

Wes

bcmuledeer · Post by **bcmuledeer** » Thu Jul 28, 2011 10:51 pm

Welcome to the forum! Yes it is good reading, some very smart ppl on here and you will have a hard time stumping these guys.

Bill

onebigskittle · Post by **onebigskittle** » Thu Jul 28, 2011 10:58 pm

http://www.bowhunterssuperstore.com/index.php

j.krug · Post by **j.krug** » Fri Jul 29, 2011 1:00 am

Welcome to the forum and congrats on your new Excal!!

Sounds like you found what yer lookin' for but if not front inserts will work fine as nocks but as mentioned just check them for sharp edges.

denisdendenis · Post by **denisdendenis** » Fri Jul 29, 2011 8:20 pm

wellcome to the forum .have some fun with your excalibur and be safe
Denis

Excalibur Crossbow Forum

Greetings,and a Question?

Greetings,and a Question?

Re: Greetings,and a Question?

Re: Greetings,and a Question?

Re: Greetings,and a Question?

Re: Greetings,and a Question?

Re: Greetings,and a Question?

Re: Greetings,and a Question?

Re: Greetings,and a Question?

Re: Greetings,and a Question?

Re: Greetings,and a Question?

Re: Greetings,and a Question?

Re: Greetings,and a Question?

Re: Greetings,and a Question?

Re: Greetings,and a Question?