Illuminate Knock??????

pwweave94 · Post by **pwweave94** » Thu Sep 22, 2011 7:30 pm

My archery shop gave me a Carbon express lighted knock to try. Onlly lasted bout 10 shots. They make good bolts but not to impressed with their illuminated knocks. What is everyone else using?

gerald strine · Post by **gerald strine** » Thu Sep 22, 2011 9:21 pm

Burnt coyote lumi nock are working great for me They make a fire bolt specific one that I have been practicing with for several weeks now probably 150 shots on 3 bolts and no malfunctions at all.

pwweave94 · Post by **pwweave94** » Thu Sep 22, 2011 9:27 pm

do u happen to know what they scale out to grain wise the carbon express ones were 32.8 grains also would u happen to have a part number

AlabamaDave · Post by **AlabamaDave** » Thu Sep 22, 2011 10:25 pm

I got some Lumenok's by Burt Coyote this week,and I likem...No malfunctions and they fly pretty good...The arrows are 22" long however,and I havent checked my FOC yet...But so far,so good...I plan on hunting with them!

stumpy53 · Post by **stumpy53** » Thu Sep 22, 2011 10:39 pm

After I get my regular practicing work out in I have been shooting the same GT Laser II with a Lumenok 4-5 times a session. So far it has lit every time and shoots to the same point of impact as the rest of my arrows at 25 yards. I'll be hunting with a Lumenok this year for sure.

one shot scott · Post by **one shot scott** » Thu Sep 22, 2011 11:06 pm

im still using my burt coyote nock from last year. I love to take videos of my kills with one. I cant recall how many shots ive taken with it installed but I know its alot.

Dereck · Post by **Dereck** » Fri Sep 23, 2011 4:39 am

I just put Firenocks in mine and had no change of POI I also use 22" arrows out of my Phoenix

j.krug · Post by **j.krug** » Fri Sep 23, 2011 6:18 am

I installed Burt Coyote Lumenoks in my Firebolts. Easy to install and they work great!

gerald strine · Post by **gerald strine** » Fri Sep 23, 2011 10:24 pm

pwweave94 wrote:do u happen to know what they scale out to grain wise the carbon express ones were 32.8 grains also would u happen to have a part number

The part # is excf3 for the Excalibur fire bolt nock by Burt coyote it adds around 20 grains over a aluminum rear nock .
My combo is a fire bolt with lumenok and a 175 grain slick trick works great Danny Miller has all of the above 740 483 2312

Galgo · Post by **Galgo** » Sat Sep 24, 2011 7:43 am

I bought and installed 6 lumenoks 3 years ago. Three are still working. Never had one fail to turn on. Three are not working because they were left on for at least 12 consecutive hours after going thru deer. Highly recommend the product. WIll never go back to unlighted nock. Knowing the point of impact immediately has been a good advantage for the last three years.

Cossack · Post by **Cossack** » Sat Sep 24, 2011 9:23 am

If you care enough to send the very best: Firenocks. Not dependent on electrical connections at top and inside of arrow, battery can be changed out, nocks (minus the lighting mechanism) can be changed out too. They work EVERY time.

Raymond · Post by **Raymond** » Sat Sep 24, 2011 9:56 am

Are the firenocks easier to install and maintain than the Lumenoks?
Thank you,
Raymond

Excalibur Crossbow Forum

Illuminate Knock??????

Illuminate Knock??????

Re: Illuminate Knock??????

Re: Illuminate Knock??????

Re: Illuminate Knock??????

Re: Illuminate Knock??????

Re: Illuminate Knock??????

Re: Illuminate Knock??????

Re: Illuminate Knock??????

Re: Illuminate Knock??????

Re: Illuminate Knock??????

Re: Illuminate Knock??????

Re: Illuminate Knock??????