Got a question my buddy lit a fire under my a** last weekend have`t looked at my xbow for 20 years lost my 3 partners back then in an accident that took there lives I was suppose to be with them but due to commitment i could`t go
anyway I have a wolverine bow picked up some carbon 22 inch bolts recommended by excalibur at a shop in hamilton one of our retailers as well as a spare bow string
reading in the forum i noticed a post about about bow strings not compatible with older production models did`t want to destroy my xbow would appreciate any input as well as arrow length my old xx75 easton aluminum bolts were 19 inches long
Got a question my buddy lit a fire under my a** last weekend have`t looked at my xbow for 20 years lost my 3 partners back then in an accident that took there lives I was suppose to be with them but due to commitment i could`t go
anyway I have a wolverine bow picked up some carbon 22 inch bolts recommended by excalibur at a shop in hamilton one of our retailers as well as a spare bow string
reading in the forum i noticed a post about about bow strings not compatible with older production models did`t want to destroy my xbow would appreciate any input as well as arrow length my old xx75 easton aluminum bolts were 19 inches long
This year practice Next hunting
Thanks joe171
G'DAY JOE & WELCOME TO THE FORUM. OK MATE THIS IS THE STRING YOU NEED TO USE ONLY (EXCALIBUR SUPER FLEMISH STRING PART NO.2097) OR ANY STRING MADE USING (DACRON)..DACRON IS FOR CARVED LIMB TIP MODELS AS YOURS IS A CARVED TIP MODEL CROSSBOW SO IT WILL STRETCH WHEN IT SHOOTS..REGARDS BLACKJACK P.S IF YOUR NEW STRING IS NOT MADE FROM DACRON DO NOT USE IT OK IT WILL DAMAGE YOUR LIMBS IF ITS NOT MADE FROM DACRON, ITS THE KISS OF DEATH AS BILL.T CALLS IT...READ FREQUENTLY ASKED QUESTIONS ON STRING USE FOR YOUR MODEL. ALSO EXCALIBUR USES 20 INCH BOLTS BUT THATS MORE UP TO YOU
Can't answer your question BUT i'm glad your back out there hunting with your x bow. I'm sure your friends would want it that way. GOD bless
Dave
Be safe in all you do! See ya in the woods!!!
2010 Equinox/ Known as Doe Bow
Firebolts
Swhacker BH,s 125 grn
cheek pad /excell string
D-Bars
S-5,s
vixenmaster custom strings
I have 2 Dacron 2097 Flemish strings new unopened I will sell for $15.00 dollars shipped if they are the ones you want.
I thought they are o.k. for carved tip bows but I see some one else says no they are not.
I just thought I would put the offer out their if it is what you want you can send me a p.m.
Carved tip limbs will handle dacron doesn't matter if'en its endless loop or flemish. The flemish & endless loop are diff in the way they're made but if dacron was used they're still dacron. I shot many arrows from my vixen with carved tip limbs & flemish 2097 strings
g'day gerald & vixenmaster, boys you are both right 100 % the 2097 super flemish string as l quoted as well is the correct string without a doubt for carved limb tip models & yes its a flemish string buts its made from (DACRON) thats the difference..l guarantee it..its the same string l use on my exomags which are carved tip models as well, infact l use this string on all my excaliburs.
Last edited by blackjack on Fri Dec 09, 2011 7:12 pm, edited 1 time in total.
gerald strine wrote:I have 2 Dacron 2097 Flemish strings new unopened I will sell for $15.00 dollars shipped if they are the ones you want.
I thought they are o.k. for carved tip bows but I see some one else says no they are not.
I just thought I would put the offer out their if it is what you want you can send me a p.m.
Gerald, if you still have those strings, I'd take them. Larrie