Brass Inserts

[Farmer]

Can anyone give me an idea were to find them . The shops here do not carry them. No luck on ebay so far either. looking to outfit some 2216 aluminum arrows.

[vixenmaster]

Many of the online stores carry them. The ones fer GT arrows were too large in dia to fit my 2216 XX75. So iam curious if'en anyone does knowed of brass inserts that fit i would like to knowed also.

[Hazmat]

Try Bandonech Archery in Guelph, ask for Gail and she should be able to help you out (519-836-2245)

[Ont_Excal]

Here's one site:

http://www.3riversarchery.com/Broadhead ... thumb.html

Here's another:

http://www.lancasterarchery.com/arrows/ ... oints.html

I'm sure there are many more if you expand your search.
The Lancaster site has a downloadable catalog as well.

[vixenmaster]

Who has already installed brass inserts into 2216's ? Did they fit without sanding them down ?

[masboy]

lancaster archery supply has quite a few . I have the 110gr for gt lazer11 and they fit 2114,2117 but are a little loose in the 2116 . I looked in there book and they have them for the power bolt 57gr. and gt 1v in 60gr and the gt111 in 110gr but I don,t know the size of these but will try them in 2216s next time I go there.

[bob1961]

i got mine for my 2117 XX75 arrow from here....

http://www.above-timberline.com/index.htm

wasn't sure what i needed and a phone call to him and he was very helpful getting me what i wanted.........bob

....

[Ont_Excal]

Found one more site in my bookmarks.

http://shop.eaglearchery.com/browse.cfm ... 2,489.html

[Ont_Excal]

Found one more site in my bookmarks.

http://shop.eaglearchery.com/browse.cfm ... 2,489.html

Edit: to add site.
This retailer actually states the arrow that goes with the insert.

http://www.keystonecountrystore.com/Arrow_Inserts.html

Hope you find what you need.

[hikerman]

I install them in Easton 2216 with hot melt glue. Works well.

The Bow Shop in Waterloo Ontario stock them also.

I think the brass insterts come in two different weights. 85 and 100 or something like that.

[j.krug]

Try calling Carl at Carl's Archery in Windsor. He may not have what you need in stock but he can probably order in what you need. I've had good luck there.

519-948-7521

[vixenmaster]

I just pulled the insert out of one of my 2216 XX75 arrows. I put a GT II brass 110 gr insert into the arrow. Its almost .009 play between shaft & the insert & thats way too much run-out to suit me fer my shooting