![Image](http://i21.photobucket.com/albums/b285/williamN01/excstr800x600.jpg)
Identify this string
Moderator: Excalibur Marketing Dude
Identify this string
I bought the Exocet used over 7 yrs ago. It came with two extra strings, one like what was already on the bow and the one below. I looked at the pics of the strings on the accessories page and while it looks like the flemish string I am not sure if it is even an Excalibur product. TIA!!
![Image](http://i21.photobucket.com/albums/b285/williamN01/excstr800x600.jpg)
![Image](http://i21.photobucket.com/albums/b285/williamN01/excstr800x600.jpg)
-
- Posts: 13618
- Joined: Wed Sep 14, 2005 3:51 pm
- Location: Western Ky
Re: Identify this string
It looks like flemish dacron 2097 fer carved tip limbs, it also can be used on magtips
Re: Identify this string
It is also the best Dacron string option for all Excaliburs. Too bad that Exalibur is no longer going sell it because it was a poor seller. Too bad that Excalibur isn't aware that it was not offered here in their catalogue.vixenmaster wrote:It looks like flemish dacron 2097 fer carved tip limbs, it also can be used on magtips
![Embarassed :oops:](./images/smilies/icon_redface.gif)
The good part is that you can still get it from Excalibur's string maker Danny Miller. Other than my Boo strings the string in question (the Excalibur Super String) was the only string I cared to use.
Some people just like stepping on rakes
Re: Identify this string
Looks like the same one I put in my Axiom not long ago.
Excal Axiom SMF
Firebolts / 2" Bohning Blazers
Muzzy 125 >>>------->
Primos Trigger Stick
Nikon ProStaff 550 Rangefinder
B3,
http://www.worldclasstaxidermy.net/
Firebolts / 2" Bohning Blazers
Muzzy 125 >>>------->
Primos Trigger Stick
Nikon ProStaff 550 Rangefinder
B3,
http://www.worldclasstaxidermy.net/
Re: Identify this string
Just an observation/recommendation I'll add.
That string looks like it needs a few (actually several
) twists before installing it!
It will stretch quickly, so don't worry if you get it above the "maximum" recommended brace height a little. You'll probably be adding twists to increase the brace height soon even if you do start with it too high.
Without those added twists it could let the loops slip and open up or even come undone.
That string looks like it needs a few (actually several
![Wink :wink:](./images/smilies/icon_wink.gif)
It will stretch quickly, so don't worry if you get it above the "maximum" recommended brace height a little. You'll probably be adding twists to increase the brace height soon even if you do start with it too high.
![Laughing :lol:](./images/smilies/icon_lol.gif)
Without those added twists it could let the loops slip and open up or even come undone.
wabi
Re: Identify this string
Yeah I had to put alot of twists in mine, I set it so it was at the top of the brace height & it stretched so much it dropped below the brace height,so I ended up taking it off & putting a few more twists in it.wabi wrote:That string looks like it needs a few (actually several) twists before installing it!
Excal Axiom SMF
Firebolts / 2" Bohning Blazers
Muzzy 125 >>>------->
Primos Trigger Stick
Nikon ProStaff 550 Rangefinder
B3,
http://www.worldclasstaxidermy.net/
Firebolts / 2" Bohning Blazers
Muzzy 125 >>>------->
Primos Trigger Stick
Nikon ProStaff 550 Rangefinder
B3,
http://www.worldclasstaxidermy.net/
Re: Identify this string
Thanks for all the info!!!!!