Free string! Angel Majesty Endless Loop String Test
Moderator: Excalibur Marketing Dude
Free string! Angel Majesty Endless Loop String Test
I need a couple of testers that uses a high performance endless loop strings.
You must have;
- a chronograph
- good familiarity with endless loop high performance strings
- have a 225 or 200 lb bow equipped with an S5
- have liberal access to shooting (not your basement).
- be willing to post the results
I need you to critique an Angel Majesty endless loop string that is served with Angel Majesty serving. It is not an endurance test, just a "what do you think" test.
You may experience higher speeds and material failure (the string will not break but there may be serving issues).
I was asked by Angel Majesty to run a test on their materials on a public forum. Please keep in mind that making endless loop strings is not my bag so please bear with me if it seems I don't know what the heck I'm doing!
This will cost you nothing and you get a free string. Please send me an email with your set up including what endless loop strings you have.
You must have;
- a chronograph
- good familiarity with endless loop high performance strings
- have a 225 or 200 lb bow equipped with an S5
- have liberal access to shooting (not your basement).
- be willing to post the results
I need you to critique an Angel Majesty endless loop string that is served with Angel Majesty serving. It is not an endurance test, just a "what do you think" test.
You may experience higher speeds and material failure (the string will not break but there may be serving issues).
I was asked by Angel Majesty to run a test on their materials on a public forum. Please keep in mind that making endless loop strings is not my bag so please bear with me if it seems I don't know what the heck I'm doing!
This will cost you nothing and you get a free string. Please send me an email with your set up including what endless loop strings you have.
Last edited by Boo on Sat Jun 16, 2012 12:26 pm, edited 3 times in total.
Some people just like stepping on rakes
Re: Need a couple of testers that use fast endless loop stri
200 I can do Don, but 225 is more than my tired 'reworked' shoulders can handle repeatedly. I roll my own ELs too but only for the compound. Fun to make but not nearly as much fun/ease as a Flemish.
Vortex, Phoenix, single-shot rifles and handguns.
Incurable tinkerer.
Why hunt? Simple, it's BASIC. Why breath?!
Incurable tinkerer.
Why hunt? Simple, it's BASIC. Why breath?!
Angel Majesty String Test
The strings are made from Angel Majesty products. The materials are all pretty expensive but have been provide to me free of charge. I am not being paid for this project but I am just helping out just like I do for Excalibur and a couple of other companies. Like Strum said to me, the more we experiment with different things the more we all gain.
Here are a couple of notes for the testers. The string should settle in in about 30 shots or so. When it has stopped creeping locate the string at your desired brace height. Then take something like a shoe lace or nylon cord and wrap it around the string. With moderate pressure pull back and go up and down quickly about 5 times. This will soften the coating on the string material and will cause the string to moderately bond together. This will exclude dirt and moisture and reduce the need for string wax. Of course as the string gets old and lots of use it may start to get "hairy" at which time you can either re-burnish the string or just wax it.
You should find 2 things about this string. One is the reduced string creep and the other is a gain of 5 ft/sec or more. If there is anything else you guys notice please comment on this thread.
Here are a couple of notes for the testers. The string should settle in in about 30 shots or so. When it has stopped creeping locate the string at your desired brace height. Then take something like a shoe lace or nylon cord and wrap it around the string. With moderate pressure pull back and go up and down quickly about 5 times. This will soften the coating on the string material and will cause the string to moderately bond together. This will exclude dirt and moisture and reduce the need for string wax. Of course as the string gets old and lots of use it may start to get "hairy" at which time you can either re-burnish the string or just wax it.
You should find 2 things about this string. One is the reduced string creep and the other is a gain of 5 ft/sec or more. If there is anything else you guys notice please comment on this thread.
Some people just like stepping on rakes
Re: Angel Majesty Endless Loop String Test
5 ft per sec perked my intrest
hey Don how many testers you end up with?
hey Don how many testers you end up with?
Micro RTX
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Re: Angel Majesty Endless Loop String Test
I've sent 6 strings out so far.
Some people just like stepping on rakes
Re: Angel Majesty Endless Loop String Test
I would LOVE to do this... but i'm in a 200 LB vortex... and I've used a excal FFF string and the stock endless loop. PM me if I can still jump in this boo.
GAMIKATSU///Edward
Excalibur MEGA 405
440 GN BE Zombie Slayer
379 FPS over prochrono digital
140 Foot Lbs Kinetic Energy
Excalibur MEGA 405
440 GN BE Zombie Slayer
379 FPS over prochrono digital
140 Foot Lbs Kinetic Energy
-
- Posts: 98
- Joined: Thu Oct 14, 2010 9:21 am
- Location: WV
Re: Angel Majesty Endless Loop String Test
I would have helped, but just sold my Equinox on here. I'm afraid my Vortex doesn't qualify
Re: Angel Majesty Endless Loop String Test
well i recieved the Boo hand crafted New Angel Majesty Endless Loop String , put it right on my 2011 Exomax & let it sit for an hour & fired about 30 - 40 shots on the string, & then put 5-6 shots through the chronograph & got speeds of 342.5 , 341 . 342. at about 3 feet from the chronograph string has nice smoth feel to it , so far . only been a few arrows , ill she how i is when i have about 2- 3 huntred .
Last edited by xbowking on Sun Jun 17, 2012 5:29 pm, edited 1 time in total.
"DON'T BE SCARED JUST GET A BOO"
PREMIUM CROSSBOW STRINGS
Bohning Blazer Vanes Rock
PREMIUM CROSSBOW STRINGS
Bohning Blazer Vanes Rock
-
- Posts: 2856
- Joined: Mon Oct 25, 2010 9:02 pm
- Location: S.E. Georgia
- Contact:
Re: Angel Majesty Endless Loop String Test
Well i received my Angel Majesty endless loop Boo string in the mail today ...first thing i noticed is this is definitely a quality string made with quality materials. I put a very light coat of some dalton's wax on it & installed it to the high brace mark on my vortex. I will let it stretch some overnight & go to the range in the morning armed with my chrony and put some carbon down range!!
Will post my results/findings tomorrow.
Will post my results/findings tomorrow.
Bulldog m380 blackout
Micro 355
Matrix 350LE
Vixen II
Proud member of the Georgia Meat Hunter's Association
"Shooting tomorrow's trophy's...today"
Micro 355
Matrix 350LE
Vixen II
Proud member of the Georgia Meat Hunter's Association
"Shooting tomorrow's trophy's...today"
Re: Angel Majesty Endless Loop String Test
I am still amazed at the tightly wrapped loops.
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Re: Angel Majesty Endless Loop String Test
I like the idea of a Angel's waxless string material. They're definately thinking outside the box with serving and string material. It is very pricey though.
What was your view on the previous Flemish string you made from this material Boo? What qualities did you notice about it?
Did it bond together well after a good rubbing?
What was your view on the previous Flemish string you made from this material Boo? What qualities did you notice about it?
Did it bond together well after a good rubbing?
Re: Angel Majesty Endless Loop String Test
This ain't no amateur hour that's for sure.enormous wrote:I am still amazed at the tightly wrapped loops.
"Death leaves a heartache no one can heal. Love leaves a memory no one can steal"
Re: Angel Majesty Endless Loop String Test
Got my string yesterday..
Im digging the slick look it has..and the black and indigo color is realy nice..
I will get it on the bow pronto.
Im digging the slick look it has..and the black and indigo color is realy nice..
I will get it on the bow pronto.
Micro RTX
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
-
- Posts: 2856
- Joined: Mon Oct 25, 2010 9:02 pm
- Location: S.E. Georgia
- Contact:
Re: Angel Majesty Endless Loop String Test
Just got back from the range.
I set the brace height to the highest mark last night, total stretch overnight was just shy of .25 of an inch. After twenty shots i had to put two twist in the string to bring it to the brace height i keep which is about a credit card's width off my s5 bumper's.
As for noise the wife said she could tell no difference standing about 5yds behind me. I put 50 shots down range today. Serving wear was very minimal & in the normal places, end loops look good.
The last five shots i put through the chrony, average was 309.3 & that's using a 393gr arrow. That's the surprising part to me my viper-x string averages 316.1fps, a 6.8fps difference. That's minimal & no deal breaker to me because so far i'm really impressed with this string, a very smooth shooting string. I will put some more shots down range with it asap & post the results.
I set the brace height to the highest mark last night, total stretch overnight was just shy of .25 of an inch. After twenty shots i had to put two twist in the string to bring it to the brace height i keep which is about a credit card's width off my s5 bumper's.
As for noise the wife said she could tell no difference standing about 5yds behind me. I put 50 shots down range today. Serving wear was very minimal & in the normal places, end loops look good.
The last five shots i put through the chrony, average was 309.3 & that's using a 393gr arrow. That's the surprising part to me my viper-x string averages 316.1fps, a 6.8fps difference. That's minimal & no deal breaker to me because so far i'm really impressed with this string, a very smooth shooting string. I will put some more shots down range with it asap & post the results.
Bulldog m380 blackout
Micro 355
Matrix 350LE
Vixen II
Proud member of the Georgia Meat Hunter's Association
"Shooting tomorrow's trophy's...today"
Micro 355
Matrix 350LE
Vixen II
Proud member of the Georgia Meat Hunter's Association
"Shooting tomorrow's trophy's...today"